June 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 1 09:08:06 UTC 2015
Ending: Tue Jun 30 19:58:57 UTC 2015
Messages: 187

• [openssl-users] DTLS and packet loss   Alfred E. Heggestad
  • [openssl-users] DTLS and packet loss   Matt Caswell
    • [openssl-users] DTLS and packet loss   Alfred E. Heggestad
      • [openssl-users] DTLS and packet loss   Matt Caswell
      • [openssl-users] DTLS and packet loss   Alfred E. Heggestad
  • [openssl-users] DTLS and packet loss   Jeffrey Walton
• [openssl-users] Do you use EGD or PRNGD?   Salz, Rich
  • [openssl-users] [openssl-dev] Do you use EGD or PRNGD?   Jeffrey Walton
  • [openssl-users] Do you use EGD or PRNGD?   Jakob Bohm
    • [openssl-users] Do you use EGD or PRNGD?   Salz, Rich
  • [openssl-users] [openssl-dev] Do you use EGD or PRNGD?   Salz, Rich
    • [openssl-users] [openssl-dev] Do you use EGD or PRNGD?   Richard Levitte
• [openssl-users] Fwd: X9.31 RSA key generation for FIPS validation (180-4)   SecInterlocutor
• [openssl-users] External encryption chip and EC{DSA, DH} (with engine?)   Rémy Grünblatt
  • [openssl-users] External encryption chip and EC{DSA, DH} (with engine?)   Matt Caswell
    • [openssl-users] External encryption chip and EC{DSA, DH} (with engine?)   Thulasi Goriparthi
      • [openssl-users] External encryption chip and EC{DSA, DH} (with engine?)   Matt Caswell
• [openssl-users] Question about using fipsld for shared objects   Heberlein, Kurt William
• [openssl-users] OpenSSL.cnf File path   Cathy Fauntleroy
  • [openssl-users] OpenSSL.cnf File path   Ben Humpert
    • [openssl-users] OpenSSL.cnf File path   Salz, Rich
      • [openssl-users] OpenSSL.cnf File path   Cathy Fauntleroy
  • [openssl-users] OpenSSL.cnf File path   Thomas J. Hruska
• [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
  • [openssl-users] DTLS fragmentation and mem BIO   Matt Caswell
    • [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
      • [openssl-users] DTLS fragmentation and mem BIO   Matt Caswell
      • [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
      • [openssl-users] DTLS fragmentation and mem BIO   Matt Caswell
      • [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
      • [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
      • [openssl-users] DTLS fragmentation and mem BIO   Alfred E. Heggestad
      • [openssl-users] DTLS fragmentation and mem BIO   Lorenzo Miniero
• [openssl-users] Building OpenSSL with FIPS crypto Module Linker forking too many processes   OpenSSL Curious
  • [openssl-users] Building OpenSSL with FIPS crypto Module Linker forking too many processes   OpenSSL Curious
  • [openssl-users] Building OpenSSL with FIPS crypto Module Linker forking too many processes   John Foley
    • [openssl-users] Building OpenSSL with FIPS crypto Module Linker forking too many processes   OpenSSL Curious
  • [openssl-users] Building OpenSSL with FIPS crypto Module Linker forking too many processes   Mark
• [openssl-users] fipsld linker out of control forking, last step of build   Mark
• [openssl-users] Forthcoming OpenSSL releases   Matt Caswell
• [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Nayna Jain
  • [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Viktor Dukhovni
    • [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Nayna Jain
      • [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Viktor Dukhovni
      • [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Nayna Jain
      • [openssl-users] [openssl-dev] Is there openssl API to verify certificate content is DER or PEM format ?   Dave Thompson
      • [openssl-users] Is there openssl API to verify certificate content is DER or PEM format ?   Viktor Dukhovni
• [openssl-users] Compiling openssl fips for iOS 7.1 on Yosemite   Kawecka, Anna
  • [openssl-users] Compiling openssl fips for iOS 7.1 on Yosemite   Jeffrey Walton
• [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Nayna Jain
  • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Jakob Bohm
    • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Nayna Jain
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Thulasi Goriparthi
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Jakob Bohm
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Thulasi Goriparthi
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Thulasi Goriparthi
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Viktor Dukhovni
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Thulasi Goriparthi
      • [openssl-users] X509_STORE_free() and X509_LOOKUP_free() also frees the X509 certificates inside it   Nayna Jain
• [openssl-users] The default cipher of executable 'openssl'   Aaron
  • [openssl-users] The behavior change of command line utility -- 'openssl'   Aaron
    • [openssl-users] The behavior change of command line utility -- 'openssl'   Salz, Rich
  • [openssl-users] The default cipher of executable 'openssl'   Dave Thompson
    • [openssl-users] The default cipher of executable 'openssl'   Aaron
      • [openssl-users] The default cipher of executable 'openssl'   Viktor Dukhovni
      • [openssl-users] The default cipher of executable 'openssl'   Aaron
      • [openssl-users] The default cipher of executable 'openssl'   Viktor Dukhovni
      • [openssl-users] The default cipher of executable 'openssl'   Aaron
  • [openssl-users] The default cipher of executable 'openssl'   Dave Thompson
• [openssl-users] The openssl can verify certificate chain successful when no any root CA files   Jerry OELoo
• [openssl-users] Not getting "RSA" keyword for a key in fips mode   Gayathri Manoj
  • [openssl-users] Not getting "RSA" keyword for a key in fips mode   Dr. Stephen Henson
    • [openssl-users] Not getting "RSA" keyword for a key in fips mode   Gayathri Manoj
• [openssl-users] OpenSSL version 0.9.8zg released   OpenSSL
• [openssl-users] OpenSSL version 1.0.0s released   OpenSSL
• [openssl-users] OpenSSL version 1.0.1n released   OpenSSL
• [openssl-users] OpenSSL version 1.0.2b released   OpenSSL
  • [openssl-users] OpenSSL version 1.0.2b released   Jakob Bohm
• [openssl-users] OpenSSL Security Advisory   OpenSSL
• [openssl-users] cannot configure openssl-1.0.1n on Windows with msys --target already defined - (offending arg: mingw) -- the issue does not occur in openssl-1.0.1l and openssl-1.0.1m.   Avery A. Tarasov
  • [openssl-users] cannot configure openssl-1.0.1n on Windows with msys --target already defined - (offending arg: mingw) -- the issue does not occur in openssl-1.0.1l and openssl-1.0.1m.   Avery A. Tarasov
• [openssl-users] X509_V_ERR_INVALID_PURPOSE when validating TLS client with "any purpose" EKU (2.5.29.37.0)   Alan Egerton
• [openssl-users] [openssl-announce] Forthcoming releases   Richard Levitte
• [openssl-users] OpenSSL version 1.0.1o released   OpenSSL
• [openssl-users] OpenSSL version 1.0.2c released   OpenSSL
• [openssl-users] [openssl-announce] Clarification on forthcoming releases   Richard Levitte
• [openssl-users] Cygwin untar of 1.0.1n gives "tar: A lone zero block at 46120"   Kevin Layer
  • [openssl-users] Cygwin untar of 1.0.1n gives "tar: A lone zero block at 46120"   avery.a.tarasov at securityengineer.pro
    • [openssl-users] Cygwin untar of 1.0.1n gives "tar: A lone zero block at 46120"   Kevin Layer
      • [openssl-users] Cygwin untar of 1.0.1n gives "tar: A lone zero block at 46120"   Salz, Rich
• [openssl-users] OpenSSL support on Solaris 11 (built on Solaris 10)   Atul Thosar
  • [openssl-users] [openssl-dev] OpenSSL support on Solaris 11 (built on Solaris 10)   Nico Williams
    • [openssl-users] [openssl-dev] OpenSSL support on Solaris 11 (built on Solaris 10)   Nico Williams
  • [openssl-users] OpenSSL support on Solaris 11 (built on Solaris 10)   Valerie Fenwick
    • [openssl-users] OpenSSL support on Solaris 11 (built on Solaris 10)   Matt Caswell
• [openssl-users] Application and TCP buffers with OpenSSL   Dipak Gaigole
• [openssl-users] Certificat & CRL verification chain by callback   Fabrice
  • [openssl-users] Certificat & CRL verification chain by callback   Viktor Dukhovni
    • [openssl-users] Certificat & CRL verification chain by callback   Fabrice
      • [openssl-users] Certificat & CRL verification chain by callback   Viktor Dukhovni
      • [openssl-users] Certificat & CRL verification chain by callback   Fabrice
  • [openssl-users] Certificat & CRL verification chain by callback   Jakob Bohm
• [openssl-users] Fast DH parameters generation   Massimiliano Pala
  • [openssl-users] Fast DH parameters generation   Jeffrey Walton
• [openssl-users] DES3 CFB1 mode   Marcus Vinicius do Nascimento
• [openssl-users] FIPS 140-2 hostages executed   Steve Marquess
• [openssl-users] How to use the default ECDSA verify operation in my engine   Jacques FLORENCE
  • [openssl-users] How to use the default ECDSA verify operation in my engine   Rémy Grünblatt
  • [openssl-users] How to use the default ECDSA verify operation in my engine   Dmitry Belyavsky
• [openssl-users] Provisional FIPS 140-2 casualty list   Steve Marquess
  • [openssl-users] Provisional FIPS 140-2 casualty list   Jeffrey Walton
    • [openssl-users] Provisional FIPS 140-2 casualty list   Steve Marquess
• [openssl-users] Windows Compile Fails   Jay Foster
  • [openssl-users] Windows Compile Fails   Thomas J. Hruska
    • [openssl-users] Windows Compile Fails   Michael Wojcik
    • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Michael Wojcik
      • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Michael Wojcik
      • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Jay Foster
      • [openssl-users] Windows Compile Fails   Michael Wojcik
      • [openssl-users] Windows Compile Fails   Sergio NNX
      • [openssl-users] Windows Compile Fails   Jeremy Farrell
      • [openssl-users] Windows Compile Fails   Michael Wojcik
      • [openssl-users] Windows Compile Fails   Thomas J. Hruska
• [openssl-users] Bug 1.0.1f - selfsign ignores email_in_dn setting   Ben Humpert
  • [openssl-users] Bug 1.0.1f - selfsign ignores email_in_dn setting   Jakob Bohm
    • [openssl-users] Bug 1.0.1f - selfsign ignores email_in_dn setting   Ben Humpert
      • [openssl-users] Bug 1.0.1f - selfsign ignores email_in_dn setting   Jakob Bohm
• [openssl-users] beginner needs advice on data signature/verification   Marco Warga
  • [openssl-users] beginner needs advice on data signature/verification   Michael Wojcik
    • [openssl-users] beginner needs advice on data signature/verification   Marco Warga
      • [openssl-users] beginner needs advice on data signature/verification   Jakob Bohm
      • [openssl-users] beginner needs advice on data signature/verification   Michael Wojcik
• [openssl-users] Bug or Not in 1.0.2b?   Oliver Niebuhr
• [openssl-users] X509_verify() error - block type is not 01   Nayna Jain
  • [openssl-users] X509_verify() error - block type is not 01   Viktor Dukhovni
    • [openssl-users] [openssl-dev] X509_verify() error - block type is not 01   Nayna Jain
      • [openssl-users] [openssl-dev] X509_verify() error - block type is not 01   Viktor Dukhovni
      • [openssl-users] [openssl-dev] X509_verify() error - block type is not 01   Nayna Jain
      • [openssl-users] [openssl-dev] X509_verify() error - block type is not 01   Viktor Dukhovni
• [openssl-users] Suggested way to add option to both SSL_CTX* and SSL*?   Jeffrey Walton
  • [openssl-users] Suggested way to add option to both SSL_CTX* and SSL*?   Salz, Rich
    • [openssl-users] Suggested way to add option to both SSL_CTX* and SSL*?   Dr. Stephen Henson
• [openssl-users] How to provide KDF to ECDH key computation when using EVP API?   Reinier Torenbeek
  • [openssl-users] How to provide KDF to ECDH key computation when using EVP API?   Reinier Torenbeek
    • [openssl-users] How to provide KDF to ECDH key computation when using EVP API?   Reinier Torenbeek
    • [openssl-users] How to provide KDF to ECDH key computation when using EVP API?   Jakob Bohm
• [openssl-users] Call for FIPS 140-2 stakeholders   Steve Marquess
  • [openssl-users] Call for FIPS 140-2 stakeholders   Tom Francis
• [openssl-users] RT was down today, please resend   Richard Levitte
• [openssl-users] Has the support for SPARC architecture crypto extensions been Implemented?   Aaron
  • [openssl-users] Has the support for SPARC architecture crypto extensions been Implemented?   Aaron
• [openssl-users] Create CMS signed data only with signature(not requiring data)   Rishi Pathak
  • [openssl-users] Create CMS signed data only with signature(not requiring data)   Jakob Bohm
• [openssl-users] Generating FIPS Compliant libcrypto.so   Mark
  • [openssl-users] Generating FIPS Compliant libcrypto.so   Mark
    • [openssl-users] Generating FIPS Compliant libcrypto.so   Mark
• [openssl-users] New FIPS 140-2 "SE" Validation Approved   Steve Marquess
  • [openssl-users] New FIPS 140-2 "SE" Validation Approved   jonetsu
    • [openssl-users] New FIPS 140-2 "SE" Validation Approved   Steve Marquess
• [openssl-users] Implementing ECDSA in an engine   Reinier Torenbeek
  • [openssl-users] Implementing ECDSA in an engine   Dmitry Belyavsky
    • [openssl-users] Implementing ECDSA in an engine   Reinier Torenbeek
      • [openssl-users] Implementing ECDSA in an engine   Dmitry Belyavsky
  • [openssl-users] Implementing ECDSA in an engine   Dr. Stephen Henson
    • [openssl-users] Implementing ECDSA in an engine   Reinier Torenbeek
• [openssl-users] S/MIME Mails signed with SHA256 certificate and/or SHA256 Hash   Walter H.
  • [openssl-users] S/MIME Mails signed with SHA256 certificate and/or SHA256 Hash   Jakob Bohm
    • [openssl-users] S/MIME Mails signed with SHA256 certificate and/or SHA256 Hash   Walter H.
• [openssl-users] Logjam impact on 0.9.8y version   Sandeep Umesh
• [openssl-users] Compiling FIPS compliant Openssl for SSE architecture   Shobha Dashottar
• [openssl-users] Query on TLS1.2 and use of DES ciphers   Srinivas
  • [openssl-users] Query on TLS1.2 and use of DES ciphers   Salz, Rich
    • [openssl-users] Query on TLS1.2 and use of DES ciphers   Srinivas
      • [openssl-users] Query on TLS1.2 and use of DES ciphers   Kurt Roeckx
• [openssl-users] How to verify a cert chain using Openssl command line?   David Li
  • [openssl-users] How to verify a cert chain using Openssl command line?   Ben Humpert
    • [openssl-users] How to verify a cert chain using Openssl command line?   David Li
      • [openssl-users] How to verify a cert chain using Openssl command line?   Ben Humpert
      • [openssl-users] How to verify a cert chain using Openssl command line?   David Li
• [openssl-users] cms sign/verify   kwhb
• [openssl-users] libtlssep   W. Michael Petullo
• [openssl-users] Use an engine in only part of my application   Jacques FLORENCE

Last message date: Tue Jun 30 19:58:57 UTC 2015
Archived on: Sat Jul 11 20:44:39 UTC 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...