[openssl-users] openssl-1.0.2-stable-SNAP-20150504 error
John Foley
foleyj at cisco.com
Mon May 4 13:28:37 UTC 2015
That's the same symptom I see on 32-bit systems. It appears to be
caused by 5b38d54753acdabbf6b1d5e15d38ee81fb0612a2.
On 05/04/2015 09:21 AM, The Doctor wrote:
> This also occured in openssl-1.0.2-stable-SNAP-20150503
>
>
> Script started on Mon May 4 07:06:41 2015
> ns2.nl2k.ab.ca//usr/source/openssl-1.0.2-stable-SNAP-20150504$ egrep bsdi Confi
> gure
> "bsdi-elf-gcc", "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
> "debug-bsdi-x86-elf", "gcc3:-DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer -O2 -Wall -g::${BSDthreads}::-lgmp -ldl -lm -lc:THIRY_TWO_BIT_LONG RC4_CHUNK BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
> ns2.nl2k.ab.ca//usr/source/openssl-1.0.2-stable-SNAP-20150504$ mak && make test
> [Ans2.nl2k.ab.ca//usr/source/openssl-1.0.2-stable-SNAP-20150504$ mak && make tes[Kt
> sh: mak: command not found
> ns2.nl2k.ab.ca//usr/source/openssl-1.0.2-stable-SNAP-20150504$ ^k^ke
> make && make test
> making all in crypto...
> making all in crypto/objects...
> making all in crypto/md4...
> making all in crypto/md5...
> making all in crypto/sha...
> making all in crypto/mdc2...
> making all in crypto/hmac...
> making all in crypto/ripemd...
> making all in crypto/whrlpool...
> making all in crypto/des...
> making all in crypto/aes...
> making all in crypto/rc2...
> making all in crypto/rc4...
> making all in crypto/rc5...
> making all in crypto/idea...
> making all in crypto/bf...
> making all in crypto/cast...
> making all in crypto/camellia...
> making all in crypto/seed...
> making all in crypto/modes...
> making all in crypto/bn...
> making all in crypto/ec...
> making all in crypto/rsa...
> making all in crypto/dsa...
> making all in crypto/ecdsa...
> making all in crypto/dh...
> making all in crypto/ecdh...
> making all in crypto/dso...
> making all in crypto/engine...
> making all in crypto/buffer...
> making all in crypto/bio...
> making all in crypto/stack...
> making all in crypto/lhash...
> making all in crypto/rand...
> making all in crypto/err...
> making all in crypto/evp...
> making all in crypto/asn1...
> making all in crypto/pem...
> making all in crypto/x509...
> making all in crypto/x509v3...
> making all in crypto/conf...
> making all in crypto/txt_db...
> making all in crypto/pkcs7...
> making all in crypto/pkcs12...
> making all in crypto/comp...
> making all in crypto/ocsp...
> making all in crypto/ui...
> making all in crypto/krb5...
> making all in crypto/cms...
> making all in crypto/pqueue...
> making all in crypto/ts...
> making all in crypto/jpake...
> making all in crypto/srp...
> making all in crypto/store...
> making all in crypto/cmac...
> if [ -n "libcrypto.so.1.0.0 libssl.so.1.0.0" ]; then (cd ..; make libcrypto.so.1.0.0); fi
> [ -z "" ] || gcc3 -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_THREAD_SAFE -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer -O2 -Wall -g -DOPENSSL_EXPERIMENTAL_JPAKE -DOPENSSL_EXPERIMENTAL_LIBUNBOUND -DOPENSSL_EXPERIMENTAL_STORE -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DGHASH_ASM -Iinclude -DFINGERPRINT_PREMAIN_DSO_LOAD -o fips_premain_dso fips_premain.c fipscanister.o libcrypto.a -lgmp -ldl -lm -lc
> making all in ssl...
> if [ -n "libcrypto.so.1.0.0 libssl.so.1.0.0" ]; then (cd ..; make libssl.so.1.0.0); fi
> [ -z "" ] || gcc3 -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -pthread -D_THREAD_SAFE -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DKRB5_MIT -DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer -O2 -Wall -g -DOPENSSL_EXPERIMENTAL_JPAKE -DOPENSSL_EXPERIMENTAL_LIBUNBOUND -DOPENSSL_EXPERIMENTAL_STORE -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DGHASH_ASM -Iinclude -DFINGERPRINT_PREMAIN_DSO_LOAD -o fips_premain_dso fips_premain.c fipscanister.o libcrypto.a -lgmp -ldl -lm -lc
> making all in engines...
> echo
>
> making all in engines/ccgost...
> making all in apps...
> making all in test...
> making all in tools...
> testing...
> making all in apps...
> ../util/shlib_wrap.sh ./destest
> Doing cbcm
> Doing ecb
> Doing ede ecb
> Doing cbc
> Doing desx cbc
> Doing ede cbc
> Doing pcbc
> Doing cfb8 cfb16 cfb32 cfb48 cfb64 cfb64() ede_cfb64() done
> Doing ofb
> Doing ofb64
> Doing ede_ofb64
> Doing cbc_cksum
> Doing quad_cksum
> input word alignment test 0 1 2 3
> output word alignment test 0 1 2 3
> fast crypt test
> ../util/shlib_wrap.sh ./ideatest
> ecb idea ok
> cbc idea ok
> cfb64 idea ok
> ../util/shlib_wrap.sh ./shatest
> test 1 ok
> test 2 ok
> test 3 ok
> ../util/shlib_wrap.sh ./sha1test
> test 1 ok
> test 2 ok
> test 3 ok
> ../util/shlib_wrap.sh ./sha256t
> Testing SHA-256 ... passed.
> Testing SHA-224 ... passed.
> ../util/shlib_wrap.sh ./sha512t
> Testing SHA-512 ... passed.
> Testing SHA-384 ... passed.
> ../util/shlib_wrap.sh ./md4test
> test 1 ok
> test 2 ok
> test 3 ok
> test 4 ok
> test 5 ok
> test 6 ok
> test 7 ok
> ../util/shlib_wrap.sh ./md5test
> test 1 ok
> test 2 ok
> test 3 ok
> test 4 ok
> test 5 ok
> test 6 ok
> test 7 ok
> ../util/shlib_wrap.sh ./hmactest
> test 0 ok
> test 1 ok
> test 2 ok
> test 3 ok
> test 4 ok
> test 5 ok
> test 6 ok
> ../util/shlib_wrap.sh ./md2test
> No MD2 support
> ../util/shlib_wrap.sh ./mdc2test
> pad1 - ok
> pad2 - ok
> ../util/shlib_wrap.sh ./wp_test
> Testing Whirlpool ......... passed.
> ../util/shlib_wrap.sh ./rmdtest
> test 1 ok
> test 2 ok
> test 3 ok
> test 4 ok
> test 5 ok
> test 6 ok
> test 7 ok
> test 8 ok
> ../util/shlib_wrap.sh ./rc2test
> ecb RC2 ok
> ../util/shlib_wrap.sh ./rc4test
> test 0 ok
> test 1 ok
> test 2 ok
> test 3 ok
> test 4 ok
> test 5 ok
> test end processing ....................done
> test multi-call ....................done
> bulk test ok
> ../util/shlib_wrap.sh ./rc5test
> ecb RC5 ok
> cbc RC5 ok
> ../util/shlib_wrap.sh ./bftest
> testing blowfish in raw ecb mode
> testing blowfish in ecb mode
> testing blowfish set_key
> testing blowfish in cbc mode
> testing blowfish in cfb64 mode
> testing blowfish in ofb64
> ../util/shlib_wrap.sh ./casttest
> ecb cast5 ok
> This test will take some time....123456789ABCDEF ok
> ../util/shlib_wrap.sh ./randtest
> test 1 done
> test 2 done
> test 3 done
> test 4 done
> starting big number library test, could take a while...
> test BN_add
> test BN_sub
> test BN_lshift1
> test BN_lshift (fixed)
> test BN_lshift
> test BN_rshift1
> test BN_rshift
> test BN_sqr
> test BN_mul
> test BN_div
> test BN_div_word
> test BN_div_recp
> test BN_mod
> test BN_mod_mul
> test BN_mont
> test BN_mod_exp
> test BN_mod_exp_mont_consttime
> test BN_exp
> test BN_kronecker
> ....++++++
> ....................................................................................................
> test BN_mod_sqrt
> .....
> .....
> .....
> .....
> .....
> .....
> .....
> .....
> ......++++++++++++
> .....
> ............++++++++++++
> .....
> .....++++++++++++
> .....
> .................++++++++++++
> .....
> .............++++++++++++
> .....
> ..++++++++++++
> .....
> .........++++++++++++
> .....
> ..++++++++++++
> .....
> test BN_GF2m_add
> test BN_GF2m_mod
> test BN_GF2m_mod_mul
> test BN_GF2m_mod_sqr
> test BN_GF2m_mod_inv
> test BN_GF2m_mod_div
> test BN_GF2m_mod_exp
> test BN_GF2m_mod_sqrt
> test BN_GF2m_mod_solve_quad
> running bc
>
> verify BN_add....................................................................................................
> verify BN_sub......................................................................................................................................................
> verify BN_lshift1....................................................................................................
> verify BN_lshift (fixed)....................................................................................................
> verify BN_lshift....................................................................................................
> verify BN_rshift1....................................................................................................
> verify BN_rshift....................................................................................................
> verify BN_sqr......................................................................................................
> verify BN_mul......................................................................................................................................................
> verify BN_div............................................................................................................................................................................................................................................................................................................
> verify BN_div_word........................................................................................................................................................................................................
> verify BN_div_recp............................................................................................................................................................................................................................................................................................................
> verify BN_mod....................................................................................................
> verify BN_mod_mul............................................................................................................................................................................................................................................................................................................
> verify BN_mont.....
> verify BN_mod_exp.....
> verify BN_mod_exp_mont_consttime.....
> verify BN_exp.....
> verify BN_kronecker
> verify BN_mod_sqrt
> verify BN_GF2m_add
> verify BN_GF2m_mod
> verify BN_GF2m_mod_mul
> verify BN_GF2m_mod_sqr
> verify BN_GF2m_mod_inv
> verify BN_GF2m_mod_div
> verify BN_GF2m_mod_exp
> verify BN_GF2m_mod_sqrt
> verify BN_GF2m_mod_solve_quad
> 2222 tests passed
> test a^b%c implementations
> ../util/shlib_wrap.sh ./exptest
> ........................................................................................................................................................................................................
> done
> test elliptic curves
> ../util/shlib_wrap.sh ./ectest
> Curve defined by Weierstrass equation
> y^2 = x^3 + a*x + b (mod 0x17)
> a = 0x1
> b = 0x1
> A cyclic subgroup:
> point at infinity
> x = 0xD, y = 0x7
> x = 0x5, y = 0x4
> x = 0x11, y = 0x3
> x = 0x11, y = 0x14
> x = 0x5, y = 0x13
> x = 0xD, y = 0x10
> Generator as octet string, compressed form:
> 030D
> Generator as octet string, uncompressed form:
> 040D07
> Generator as octet string, hybrid form:
> 070D07
> A representation of the inverse of that generator in
> Jacobian projective coordinates:
> X = 0xC, Y = 0xF, Z = 0xA
>
> SEC2 curve secp160r1 -- Generator:
> x = 0x4A96B5688EF573284664698968C38BB913CBFC82
> y = 0x23A628553168947D59DCC912042351377AC5FB32
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve P-192 -- Generator:
> x = 0x188DA80EB03090F67CBF20EB43A18800F4FF0AFD82FF1012
> y = 0x7192B95FFC8DA78631011ED6B24CDD573F977A11E794811
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve P-224 -- Generator:
> x = 0xB70E0CBD6BB4BF7F321390B94A03C1D356C21122343280D6115C1D21
> y = 0xBD376388B5F723FB4C22DFE6CD4375A05A07476444D5819985007E34
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve P-256 -- Generator:
> x = 0x6B17D1F2E12C4247F8BCE6E563A440F277037D812DEB33A0F4A13945D898C296
> y = 0x4FE342E2FE1A7F9B8EE7EB4A7C0F9E162BCE33576B315ECECBB6406837BF51F5
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve P-384 -- Generator:
> x = 0xAA87CA22BE8B05378EB1C71EF320AD746E1D3B628BA79B9859F741E082542A385502F25DBF55296C3A545E3872760AB7
> y = 0x3617DE4A96262C6F5D9E98BF9292DC29F8F41DBD289A147CE9DA3113B5F0B8C00A60B1CE1D7E819D7A431D7C90EA0E5F
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve P-521 -- Generator:
> x = 0xC6858E06B70404E9CD9E3ECB662395B4429C648139053FB521F828AF606B4D3DBAA14B5E77EFE75928FE1DC127A2FFA8DE3348B3C1856A429BF97E7E31C2E5BD66
> y = 0x11839296A789A3BC0045C8A5FB42C7D1BD998F54449579B446817AFBD17273E662C97EE72995EF42640C550B9013FAD0761353C7086A272C24088BE94769FD16650
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
> combined multiplication ..... ok
>
>
> Curve defined by Weierstrass equation
> y^2 + x*y = x^3 + a*x^2 + b (mod 0x13)
> a = 0x3
> b = 0x1
> (0x... means binary polynomial)
> A cyclic subgroup:
> point at infinity
> x = 0x6, y = 0x8
> x = 0x1, y = 0xD
> x = 0x7, y = 0x2
> x = 0x0, y = 0x1
> x = 0x7, y = 0x5
> x = 0x1, y = 0xC
> x = 0x6, y = 0xE
>
> Generator as octet string, uncompressed form:
> 040608
>
> NIST curve K-163 -- Generator:
> x = 0x2FE13C0537BBC11ACAA07D793DE4E6D5E5C94EEE8
> y = 0x289070FB05D38FF58321F2E800536D538CCDAA3D9
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve B-163 -- Generator:
> x = 0x3F0EBA16286A2D57EA0991168D4994637E8343E36
> y = 0xD51FBC6C71A0094FA2CDD545B11C5C0C797324F1
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve K-233 -- Generator:
> x = 0x17232BA853A7E731AF129F22FF4149563A419C26BF50A4C9D6EEFAD6126
> y = 0x1DB537DECE819B7F70F555A67C427A8CD9BF18AEB9B56E0C11056FAE6A3
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve B-233 -- Generator:
> x = 0xFAC9DFCBAC8313BB2139F1BB755FEF65BC391F8B36F8F8EB7371FD558B
> y = 0x1006A08A41903350678E58528BEBF8A0BEFF867A7CA36716F7E01F81052
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve K-283 -- Generator:
> x = 0x503213F78CA44883F1A3B8162F188E553CD265F23C1567A16876913B0C2AC2458492836
> y = 0x1CCDA380F1C9E318D90F95D07E5426FE87E45C0E8184698E45962364E34116177DD2259
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve B-283 -- Generator:
> x = 0x5F939258DB7DD90E1934F8C70B0DFEC2EED25B8557EAC9C80E2E198F8CDBECD86B12053
> y = 0x3676854FE24141CB98FE6D4B20D02B4516FF702350EDDB0826779C813F0DF45BE8112F4
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve K-409 -- Generator:
> x = 0x60F05F658F49C1AD3AB1890F7184210EFD0987E307C84C27ACCFB8F9F67CC2C460189EB5AAAA62EE222EB1B35540CFE9023746
> y = 0x1E369050B7C4E42ACBA1DACBF04299C3460782F918EA427E6325165E9EA10E3DA5F6C42E9C55215AA9CA27A5863EC48D8E0286B
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve B-409 -- Generator:
> x = 0x15D4860D088DDB3496B0C6064756260441CDE4AF1771D4DB01FFE5B34E59703DC255A868A1180515603AEAB60794E54BB7996A7
> y = 0x61B1CFAB6BE5F32BBFA78324ED106A7636B9C5A7BD198D0158AA4F5488D08F38514F1FDF4B4F40D2181B3681C364BA0273C706
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve K-571 -- Generator:
> x = 0x26EB7A859923FBC82189631F8103FE4AC9CA2970012D5D46024804801841CA44370958493B205E647DA304DB4CEB08CBBD1BA39494776FB988B47174DCA88C7E2945283A01C8972
> y = 0x349DC807F4FBF374F4AEADE3BCA95314DD58CEC9F307A54FFC61EFC006D8A2C9D4979C0AC44AEA74FBEBBB9F772AEDCB620B01A7BA7AF1B320430C8591984F601CD4C143EF1C7A3
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
>
> NIST curve B-571 -- Generator:
> x = 0x303001D34B856296C16C0D40D3CD7750A93D1D2955FA80AA5F40FC8DB7B2ABDBDE53950F4C0D293CDD711A35B67FB1499AE60038614F1394ABFA3B4C850D927E1E7769C8EEC2D19
> y = 0x37BF27342DA639B6DCCFFFEB73D69D78C6C27A6009CBBCA1980F8533921E8A684423E43BAB08A576291AF8F461BB2A8B3531D2F0485C19B16E2F1516E23DD3C1A4827AF1B8AC15B
> verify degree ... ok
> verify group order .... ok
> long/negative scalar tests allowing precomputation ... without precomputation ... ok
> combined multiplication ..... ok
>
> testing internal curves: ................................................................................. ok
>
> test ecdsa
> ../util/shlib_wrap.sh ./ecdsatest
> some tests from X9.62:
> testing prime192v1: .... ok
> testing prime239v1: .... ok
> testing c2tnb191v1: .... ok
> testing c2tnb239v1: .... ok
>
> testing ECDSA_sign() and ECDSA_verify() with some internal curves:
> secp160k1: ........ ok
> secp160r1: ........ ok
> secp160r2: ........ ok
> secp192k1: ........ ok
> secp224k1: ........ ok
> secp224r1: ........ ok
> secp256k1: ........ ok
> secp384r1: ........ ok
> secp521r1: ........ ok
> prime192v1: ........ ok
> prime192v2: ........ ok
> prime192v3: ........ ok
> prime239v1: ........ ok
> prime239v2: ........ ok
> prime239v3: ........ ok
> prime256v1: ........ ok
> sect163k1: ........ ok
> sect163r1: ........ ok
> sect163r2: ........ ok
> sect193r1: ........ ok
> sect193r2: ........ ok
> sect233k1: ........ ok
> sect233r1: ........ ok
> sect239k1: ........ ok
> sect283k1: ........ ok
> sect283r1: ........ ok
> sect409k1: ........ ok
> sect409r1: ........ ok
> sect571k1: ........ ok
> sect571r1: ........ ok
> c2pnb163v1: ........ ok
> c2pnb163v2: ........ ok
> c2pnb163v3: ........ ok
> c2pnb176v1: ........ ok
> c2tnb191v1: ........ ok
> c2tnb191v2: ........ ok
> c2tnb191v3: ........ ok
> c2pnb208w1: ........ ok
> c2tnb239v1: ........ ok
> c2tnb239v2: ........ ok
> c2tnb239v3: ........ ok
> c2pnb272w1: ........ ok
> c2pnb304w1: ........ ok
> c2tnb359v1: ........ ok
> c2pnb368w1: ........ ok
> c2tnb431r1: ........ ok
> wap-wsg-idm-ecid-wtls3: ........ ok
> wap-wsg-idm-ecid-wtls5: ........ ok
> wap-wsg-idm-ecid-wtls7: ........ ok
> wap-wsg-idm-ecid-wtls9: ........ ok
> wap-wsg-idm-ecid-wtls10: ........ ok
> wap-wsg-idm-ecid-wtls11: ........ ok
> wap-wsg-idm-ecid-wtls12: ........ ok
> brainpoolP160r1: ........ ok
> brainpoolP160t1: ........ ok
> brainpoolP192r1: ........ ok
> brainpoolP192t1: ........ ok
> brainpoolP224r1: ........ ok
> brainpoolP224t1: ........ ok
> brainpoolP256r1: ........ ok
> brainpoolP256t1: ........ ok
> brainpoolP320r1: ........ ok
> brainpoolP320t1: ........ ok
> brainpoolP384r1: ........ ok
> brainpoolP384t1: ........ ok
> brainpoolP512r1: ........ ok
> brainpoolP512t1: ........ ok
>
> ECDSA test passed
> test ecdh
> ../util/shlib_wrap.sh ./ecdhtest
> Testing key generation with NIST Prime-Curve P-192 .... ok
> Testing key generation with NIST Prime-Curve P-224 .... ok
> Testing key generation with NIST Prime-Curve P-256 .... ok
> Testing key generation with NIST Prime-Curve P-384 .... ok
> Testing key generation with NIST Prime-Curve P-521 .... ok
> Testing key generation with NIST Binary-Curve K-163 .... ok
> Testing key generation with NIST Binary-Curve B-163 .... ok
> Testing key generation with NIST Binary-Curve K-233 .... ok
> Testing key generation with NIST Binary-Curve B-233 .... ok
> Testing key generation with NIST Binary-Curve K-283 .... ok
> Testing key generation with NIST Binary-Curve B-283 .... ok
> Testing key generation with NIST Binary-Curve K-409 .... ok
> Testing key generation with NIST Binary-Curve B-409 .... ok
> Testing key generation with NIST Binary-Curve K-571 .... ok
> Testing key generation with NIST Binary-Curve B-571 .... ok
> Testing ECDH shared secret with Brainpool Prime-Curve brainpoolP256r1 ok
> Testing ECDH shared secret with Brainpool Prime-Curve brainpoolP384r1 ok
> Testing ECDH shared secret with Brainpool Prime-Curve brainpoolP512r1 ok
> cat
> base64
> aes-128-cbc
> aes-128-cbc base64
> aes-128-ecb
> aes-128-ecb base64
> aes-192-cbc
> aes-192-cbc base64
> aes-192-ecb
> aes-192-ecb base64
> aes-256-cbc
> aes-256-cbc base64
> aes-256-ecb
> aes-256-ecb base64
> base64
> base64 base64
> bf
> bf base64
> bf-cbc
> bf-cbc base64
> bf-cfb
> bf-cfb base64
> bf-ecb
> bf-ecb base64
> bf-ofb
> bf-ofb base64
> camellia-128-cbc
> camellia-128-cbc base64
> camellia-128-ecb
> camellia-128-ecb base64
> camellia-192-cbc
> camellia-192-cbc base64
> camellia-192-ecb
> camellia-192-ecb base64
> camellia-256-cbc
> camellia-256-cbc base64
> camellia-256-ecb
> camellia-256-ecb base64
> cast
> cast base64
> cast-cbc
> cast-cbc base64
> cast5-cbc
> cast5-cbc base64
> cast5-cfb
> cast5-cfb base64
> cast5-ecb
> cast5-ecb base64
> cast5-ofb
> cast5-ofb base64
> des
> des base64
> des-cbc
> des-cbc base64
> des-cfb
> des-cfb base64
> des-ecb
> des-ecb base64
> des-ede
> des-ede base64
> des-ede-cbc
> des-ede-cbc base64
> des-ede-cfb
> des-ede-cfb base64
> des-ede-ofb
> des-ede-ofb base64
> des-ede3
> des-ede3 base64
> des-ede3-cbc
> des-ede3-cbc base64
> des-ede3-cfb
> des-ede3-cfb base64
> des-ede3-ofb
> des-ede3-ofb base64
> des-ofb
> des-ofb base64
> des3
> des3 base64
> desx
> desx base64
> idea
> idea base64
> idea-cbc
> idea-cbc base64
> idea-cfb
> idea-cfb base64
> idea-ecb
> idea-ecb base64
> idea-ofb
> idea-ofb base64
> rc2
> rc2 base64
> rc2-40-cbc
> rc2-40-cbc base64
> rc2-64-cbc
> rc2-64-cbc base64
> rc2-cbc
> rc2-cbc base64
> rc2-cfb
> rc2-cfb base64
> rc2-ecb
> rc2-ecb base64
> rc2-ofb
> rc2-ofb base64
> rc4
> rc4 base64
> rc4-40
> rc4-40 base64
> rc5
> rc5 base64
> rc5-cbc
> rc5-cbc base64
> rc5-cfb
> rc5-cfb base64
> rc5-ecb
> rc5-ecb base64
> rc5-ofb
> rc5-ofb base64
> seed
> seed base64
> seed-cbc
> seed-cbc base64
> seed-cfb
> seed-cfb base64
> seed-ecb
> seed-ecb base64
> seed-ofb
> seed-ofb base64
> zlib
> zlib base64
> echo test normal x509v1 certificate
> test normal x509v1 certificate
> sh ./tx509 2>/dev/null
> testing X509 conversions
> p -> d
> p -> n
> p -> p
> d -> d
> n -> d
> p -> d
> d -> n
> n -> n
> p -> n
> d -> p
> n -> p
> p -> p
> echo test first x509v3 certificate
> test first x509v3 certificate
> sh ./tx509 v3-cert1.pem 2>/dev/null
> testing X509 conversions
> p -> d
> p -> n
> p -> p
> d -> d
> n -> d
> p -> d
> d -> n
> n -> n
> p -> n
> d -> p
> n -> p
> p -> p
> echo test second x509v3 certificate
> test second x509v3 certificate
> sh ./tx509 v3-cert2.pem 2>/dev/null
> testing X509 conversions
> p -> d
> p -> n
> p -> p
> d -> d
> n -> d
> p -> d
> d -> n
> n -> n
> p -> n
> d -> p
> n -> p
> p -> p
> rsa
> testing rsa conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> ../util/shlib_wrap.sh ./rsa_test
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> PKCS #1 v1.5 encryption/decryption ok
> OAEP encryption/decryption ok
> testing crl conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> testing session-id conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> Generate and verify a certificate request
> generating certificate request
> rsa
> There should be a 2 sequences of .'s and some +'s.
> There should not be more that at most 80 per line
> This could take some time.
> Generating a 1024 bit RSA private key
> .......................++++++
> ..........................................................++++++
> writing new private key to 'testkey.pem'
> -----
> You are about to be asked to enter information that will be incorporated
> into your certificate request.
> What you are about to enter is what is called a Distinguished Name or a DN.
> There are quite a few fields but you can leave some blank
> For some fields there will be a default value,
> If you enter '.', the field will be left blank.
> -----
> Country Name (2 letter code) [AU]:AU
> State or Province Name (full name) [Queensland]:
> Locality Name (eg, city) []:Brisbane
> Organization Name (eg, company) []:CryptSoft Pty Ltd
> Organizational Unit Name (eg, section) []:.
> Common Name (eg, YOUR name) []:Eric Young
> Email Address []:eay at mincom.oz.au
> verify OK
> testing req conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> testing req conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> testing pkcs7 conversions
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> testing pkcs7 conversions (2)
> p -> d
> p -> p
> d -> d
> p -> d
> d -> p
> p -> p
> The following command should have some OK's and some failures
> There are definitly a few expired certificates
> ../util/shlib_wrap.sh ../apps/openssl verify -CApath ../certs/demo ../certs/demo/*.pem
> Segmentation fault
> *** Error code 139
>
> Stop.
> *** Error code 1
>
> Stop.
> ns2.nl2k.ab.ca//usr/source/openssl-1.0.2-stable-SNAP-20150504$ exit
> exit
>
> Script done on Mon May 4 07:09:07 2015
>
>
> This error does not occur in openssl-1.0.2-stable-SNAP-20150502
>
> Please fix.
>
More information about the openssl-users
mailing list