[openssl-users] Help compiling on HPUX

[Ludwig, Mark]

> From: Michael Wojcik, Wednesday, November 08, 2017 7:03 AM
> To: openssl-users at openssl.org
> Subject: Re: [openssl-users] Help compiling on HPUX
> 
> > From: openssl-users [mailto:openssl-users-bounces at openssl.org] On Behalf
> Of Dan Freed
> > Sent: Tuesday, November 07, 2017 19:14
> > To: openssl-users at openssl.org
> > Subject: [openssl-users] Help compiling on HPUX
> 
> > I see that there are a few posts about compiling openssl on HP-UX, so I’m
> hopeful that someone can help me out.
> 
> My initial suspect is the assembly modules. I suggest configuring with no-asm,
> and if that works and you really want the assembly code for performance, then
> investigate further.
> 
> Another possibility is optimization. We had issues building OpenSSL for HP-UX
> (PA-RISC and Itanium) with +O4, which is what Configure specifies for at least
> some HP-UX builds. We backed it off to +O1 (by editing Configure; we actually
> use our own Configure script, and merge in changes from the official one each
> time we update to a new OpenSSL release).

Dan, you did not specify the platform.  I have not built on RISC since OpenSSL 0.9.8.
I have built OpenSSL 1.0.2k on Itanium as follows.  I mostly agree with Michael, 
but have not backed off optimization quite as far.  Note that my use cases do not
include encrypting/decrypting large payloads, so can get away with reduced
performance to get correct results (i.e., pass the tests).

I had to edit util/selftest.pl for the compiler's identification output
and because the ar(1) command will not accept /dev/null as an input file.

I also eliminated a lot of the tests in test/cms-tests, because we do not use the 
modules being tested.  (They were failing.)  I can believe these might work with 
lower optimization such as Michael recommends.

Below is the Configure output.  Hope this helps.

Configuring for hpux64-ia64-cc
    no-asm          [option]   OPENSSL_NO_ASM
    no-dso          [option]  
    no-ec_nistp_64_gcc_128 [default]  OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir)
    no-gmp          [default]  OPENSSL_NO_GMP (skip dir)
    no-jpake        [experimental] OPENSSL_NO_JPAKE (skip dir)
    no-krb5         [krb5-flavor not specified] OPENSSL_NO_KRB5
    no-libunbound   [experimental] OPENSSL_NO_LIBUNBOUND (skip dir)
    no-md2          [default]  OPENSSL_NO_MD2 (skip dir)
    no-rc5          [default]  OPENSSL_NO_RC5 (skip dir)
    no-rfc3779      [default]  OPENSSL_NO_RFC3779 (skip dir)
    no-sctp         [default]  OPENSSL_NO_SCTP (skip dir)
    no-ssl-trace    [default]  OPENSSL_NO_SSL_TRACE (skip dir)
    no-ssl2         [default]  OPENSSL_NO_SSL2 (skip dir)
    no-store        [experimental] OPENSSL_NO_STORE (skip dir)
    no-unit-test    [default]  OPENSSL_NO_UNIT_TEST (skip dir)
    no-weak-ssl-ciphers [default]  OPENSSL_NO_WEAK_SSL_CIPHERS (skip dir)
    no-zlib         [default] 
    no-zlib-dynamic [default] 
IsMK1MF=0
CC            =cc
CFLAG         =+Z -DOPENSSL_PIC -DOPENSSL_THREADS  -Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN -D_REENTRANT
EX_LIBS       =-ldl
CPUID_OBJ     =mem_clr.o
BN_ASM        =bn_asm.o
EC_ASM        =
DES_ENC       =des_enc.o fcrypt_b.o
AES_ENC       =aes_core.o aes_cbc.o
BF_ENC        =bf_enc.o
CAST_ENC      =c_enc.o
RC4_ENC       =rc4_enc.o rc4_skey.o
RC5_ENC       =rc5_enc.o
MD5_OBJ_ASM   =
SHA1_OBJ_ASM  =
RMD160_OBJ_ASM=
CMLL_ENC      =camellia.o cmll_misc.o cmll_cbc.o
MODES_OBJ     =
ENGINES_OBJ   =
PROCESSOR     =
RANLIB        =/usr/ccs/bin/ranlib
ARFLAGS       =
PERL          =/usr/local/smd/bin/perl
SIXTY_FOUR_BIT_LONG mode
DES_RISC1 used
DES_UNROLL used
DES_INT used
RC4_INDEX mode
RC4_CHUNK is undefined
MD2 uses uchar

> 
> --
> Michael Wojcik
> Distinguished Engineer, Micro Focus
> 
> 
> --
> openssl-users mailing list
> To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-users