[openssl-users] 2 openssl installed?

Sampei sampei02 at tiscali.it
Tue Jun 5 06:53:50 UTC 2018 

  
Perhaps it's missing -'name openssl' in the 3 commands. 
However I
run: 
1) find / -type f -name openssl -exec ldd {} ; 
 libssl.so.4 =>
/lib/libssl.so.4 (0x0098f000)
 libgssapi_krb5.so.2 =>
/usr/lib/libgssapi_krb5.so.2 (0x00718000)
 libkrb5.so.3 =>
/usr/lib/libkrb5.so.3 (0x00830000)
 libcom_err.so.2 =>
/lib/libcom_err.so.2 (0x006ee000)
 libk5crypto.so.3 =>
/usr/lib/libk5crypto.so.3 (0x0080c000)
 libresolv.so.2 =>
/lib/libresolv.so.2 (0x006d9000)
 libcrypto.so.4 => /lib/libcrypto.so.4
(0x0089b000)
 libdl.so.2 => /lib/libdl.so.2 (0x0067c000)
 libz.so.1 =>
/usr/lib/libz.so.1 (0x00682000)
 libc.so.6 => /lib/libc.so.6
(0x0052a000)
 /lib/ld-linux.so.2 (0x0050c000) 
2) find / -type f -name
openssl -exec objdump -x {} ;

/usr/bin/openssl: file format
elf32-i386
/usr/bin/openssl
architecture: i386, flags
0x00000112:
EXEC_P, HAS_SYMS, D_PAGED
start address 0x08054490

Program
Header:
 PHDR off 0x00000034 vaddr 0x08048034 paddr 0x08048034 align
2**2
 filesz 0x000000e0 memsz 0x000000e0 flags r-x
 INTERP off
0x00000114 vaddr 0x08048114 paddr 0x08048114 align 2**0
 filesz
0x00000013 memsz 0x00000013 flags r--
 LOAD off 0x00000000 vaddr
0x08048000 paddr 0x08048000 align 2**12
 filesz 0x0004f678 memsz
0x0004f678 flags r-x
 LOAD off 0x00050000 vaddr 0x08098000 paddr
0x08098000 align 2**12
 filesz 0x00007174 memsz 0x00007174 flags rw-

DYNAMIC off 0x00052420 vaddr 0x0809a420 paddr 0x0809a420 align 2**2

filesz 0x00000110 memsz 0x00000110 flags rw-
 NOTE off 0x00000128 vaddr
0x08048128 paddr 0x08048128 align 2**2
 filesz 0x00000020 memsz
0x00000020 flags r--
 STACK off 0x00000000 vaddr 0x00000000 paddr
0x00000000 align 2**2
 filesz 0x00000000 memsz 0x00000000 flags
rw-

Dynamic Section:
 NEEDED libssl.so.4
 NEEDED libgssapi_krb5.so.2

NEEDED libkrb5.so.3
 NEEDED libcom_err.so.2
 NEEDED libk5crypto.so.3

NEEDED libresolv.so.2
 NEEDED libcrypto.so.4
 NEEDED libdl.so.2
 NEEDED
libz.so.1
 NEEDED libc.so.6
 INIT 0x80516f8
 FINI 0x8086ca8
 HASH
0x8048148
 STRTAB 0x809becc
 SYMTAB 0x804958c
 STRSZ 0x3295
 SYMENT
0x10
 DEBUG 0x0
 PLTGOT 0x809a544
 PLTRELSZ 0x16b8
 PLTREL 0x11
 JMPREL
0x8050040
 REL 0x804fed0
 RELSZ 0x170
 RELENT 0x8
 VERNEED 0x804fe90

VERNEEDNUM 0x1
 VERSYM 0x804f882
 0x6ffffef9 0x804c5ec
 0x6ffffdf7 0xdc

0x6ffffef8 0x804c6c8
 0x6ffffdf6 0x108

Version References:
 required
from libc.so.6:
 0x0d696913 0x00 04 GLIBC_2.3
 0x0d696911 0x00 03
GLIBC_2.1
 0x0d696910 0x00 02 GLIBC_2.0

Sections:
Idx Name Size VMA LMA
File off Algn
 0 .interp 00000013 08048114 08048114 00000114 2**0

CONTENTS, ALLOC, LOAD, READONLY, DATA
 1 .note.ABI-tag 00000020 08048128
08048128 00000128 2**2
 CONTENTS, ALLOC, LOAD, READONLY, DATA
 2 .hash
00001444 08048148 08048148 00000148 2**2
 CONTENTS, ALLOC, LOAD,
READONLY, DATA
 3 .dynsym 00003060 0804958c 0804958c 0000158c 2**2

CONTENTS, ALLOC, LOAD, READONLY, DATA
 4 .gnu.liblist 000000dc 0804c5ec
0804c5ec 000045ec 2**2
 CONTENTS, ALLOC, LOAD, READONLY, DATA
 5
.gnu.conflict 00000108 0804c6c8 0804c6c8 000046c8 2**2
 CONTENTS, ALLOC,
LOAD, READONLY, DATA
 6 .gnu.version 0000060c 0804f882 0804f882 00007882
2**1
 CONTENTS, ALLOC, LOAD, READONLY, DATA
 7 .gnu.version_r 00000040
0804fe90 0804fe90 00007e90 2**2
 CONTENTS, ALLOC, LOAD, READONLY, DATA

8 .rel.dyn 00000170 0804fed0 0804fed0 00007ed0 2**2
 CONTENTS, ALLOC,
LOAD, READONLY, DATA
 9 .rel.plt 000016b8 08050040 08050040 00008040
2**2
 CONTENTS, ALLOC, LOAD, READONLY, DATA
 10 .init 00000017 080516f8
080516f8 000096f8 2**2
 CONTENTS, ALLOC, LOAD, READONLY, CODE
 11 .plt
00002d80 08051710 08051710 00009710 2**2
 CONTENTS, ALLOC, LOAD,
READONLY, CODE
 12 .text 00032818 08054490 08054490 0000c490 2**4

CONTENTS, ALLOC, LOAD, READONLY, CODE
 13 .fini 0000001b 08086ca8
08086ca8 0003eca8 2**2
 CONTENTS, ALLOC, LOAD, READONLY, CODE
 14
.rodata 00010991 08086ce0 08086ce0 0003ece0 2**5
 CONTENTS, ALLOC, LOAD,
READONLY, DATA
 15 .eh_frame 00000004 08097674 08097674 0004f674 2**2

CONTENTS, ALLOC, LOAD, READONLY, DATA
 16 .data 00002420 08098000
08098000 00050000 2**5
 CONTENTS, ALLOC, LOAD, DATA
 17 .dynamic
00000110 0809a420 0809a420 00052420 2**2
 CONTENTS, ALLOC, LOAD, DATA

18 .ctors 00000008 0809a530 0809a530 00052530 2**2
 CONTENTS, ALLOC,
LOAD, DATA
 19 .dtors 00000008 0809a538 0809a538 00052538 2**2

CONTENTS, ALLOC, LOAD, DATA
 20 .jcr 00000004 0809a540 0809a540 00052540
2**2
 CONTENTS, ALLOC, LOAD, DATA
 21 .got 00000c20 0809a544 0809a544
00052544 2**2
 CONTENTS, ALLOC, LOAD, DATA
 22 .bss 00000d4c 0809b180
0809b180 00053180 2**5
 CONTENTS, ALLOC, LOAD, DATA
 23 .dynstr 000032a8
0809becc 0809becc 00053ecc 2**0
 CONTENTS, ALLOC, LOAD, READONLY, DATA

24 .gnu_debuglink 00000014 00000000 00000000 00057174 2**2
 CONTENTS,
READONLY
 25 .gnu.prelink_undo 000004d4 00000000 00000000 00057188 2**2

CONTENTS, READONLY
SYMBOL TABLE:
no symbols 
3) find / -type f -name
openssl - 
exec {} version ;
OpenSSL 0.9.7a Feb 19 2003

Il 04.06.2018
14:35 FooCrypt ha scritto: 

> find / -type f -exec {} version ;
> 
>
find / -type f -exec objdump -x {} ;
> 
> find / -type f -exec ldd {}
;
> 
> looks like you only have 1 openssl binary, 0.9.7.a on your
host.
> 
> objdump -x & ldd will show you which libraries the openssl
binary is compiled to use on your host.
> 
> so….
> 
> objdump -x [ full
path to your openssl binary ]
> 
> ldd [ full path to your openssl
binary ]
> 
>> On 4 Jun 2018, at 10:18 PM, Sampei wrote: Here is result
for first command: find / -type f -name openssl -exec {} version ;
OpenSSL 0.9.7a Feb 19 2003 What means repeat with? What I have to type
for next comand exactly please? objdump -x & ldd..... Il 04.06.2018
08:30 FooCrypt ha scritto: 
>> 
>>> find / -type f -name openssl -exec
{} version ; repeat with objdump -x & ldd to determine which libraries,
etc are being used. 
>>> 
>>>> On 4 Jun 2018, at 3:47 PM, Sampei wrote:
Can you help to understand if I have 2 OPenSSL installed into my "old
old" server please? rpm -qa | grep openssl gives: openssl-0.9.7a-33.10
Furthermore I found out following files into /usr/local/openssl-0.9.7e
(perhaps a uncompressed tar file) : apps CHANGES.SSLeay Configure
diffs.6e diffs.sec6 doc FAQ install.com INSTALL.VMS MacOS makevms.com
openssl.doxy PROBLEMS shlib tools bugs comms.txt crypto diffs.6x
diffs.sec6e do_patch.sh fips INSTALL.DJGPP INSTALL.W32 Makefile ms
openssl.spec README ssl util certs comm.txt demos diffs.7 diffs.sec7
e_os2.h include INSTALL.MacOS INSTALL.WCE Makefile.bak NEWS os2
README.ASN1 test VMS CHANGES config diffs.6 diffs.sec diffs.secfix
e_os.h INSTALL INSTALL.OS2 LICENSE Makefile.org op perl README.ENGINE
times If I find .cnf files: /usr/local/openssl-0.9.7e/apps/oid.cnf
/usr/local/openssl-0.9.7e/apps/openssl.cnf
/usr/local/openssl-0.9.7e/apps/openssl-vms.cnf
/usr/local/openssl-0.9.7e/crypto/conf/ssleay.cnf
/usr/local/openssl-0.9.7e/test/CAss.cnf
/usr/local/openssl-0.9.7e/test/CAssdh.cnf
/usr/local/openssl-0.9.7e/test/CAssdsa.cnf
/usr/local/openssl-0.9.7e/test/CAssrsa.cnf
/usr/local/openssl-0.9.7e/test/Sssdsa.cnf
/usr/local/openssl-0.9.7e/test/Sssrsa.cnf
/usr/local/openssl-0.9.7e/test/test.cnf
/usr/local/openssl-0.9.7e/test/Uss.cnf /usr/share/ssl/openssl.cnf What
do you think? Con Mobile Open 6 GB hai 6 Giga, 600 minuti e 300 SMS per
il tuo smartphone a 9EUR al mese per sempre. Passa ora a Tiscali Mobile,
il nostro mese è vero! http://tisca.li/Open6GB0318 [2] -- openssl-users
mailing list To unsubscribe:
https://mta.openssl.org/mailman/listinfo/openssl-users [3]
>>> --
openssl-users mailing list To unsubscribe:
https://mta.openssl.org/mailman/listinfo/openssl-users [4]
>> Con Mobile
Open 6 GB hai 6 Giga, 600 minuti e 300 SMS per il tuo smartphone a 9EUR
al mese per sempre. Passa ora a Tiscali Mobile, il nostro mese è vero!
http://tisca.li/Open6GB0318 [6] -- openssl-users mailing list To
unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-users
[7]
> 
> -- openssl-users mailing list To unsubscribe:
https://mta.openssl.org/mailman/listinfo/openssl-users [8]
 



Con Mobile Open 6 GB hai 6 Giga, 600 minuti e 300 SMS per il tuo smartphone a 9€ al mese per sempre. Passa ora a Tiscali Mobile, il nostro mese è vero! http://tisca.li/Open6GB0318

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mta.openssl.org/pipermail/openssl-users/attachments/20180605/0aedb1da/attachment-0001.html>

More information about the openssl-users mailing list