OpenSSL dynamic engine loading shows error
Shariful Alam
dipto181 at gmail.com
Thu Aug 26 16:26:59 UTC 2021
Dear Dmitry,
In case if it helps, I have installed my OpenSSL from the source code and
my current version is OpenSSL 1.1.1c 28 May 2019
Regards,
Shariful Alam
On Thu, Aug 26, 2021 at 10:20 AM Shariful Alam <dipto181 at gmail.com> wrote:
> Dmitry,
> Thank you for your response.
>
> As you have suggested, I have changed my engine name to maintain with the
> configuration file
>
> /* Engine Id and Name */
> static const char *engine_rsa_id = "rsa-engine-new";
> static const char *engine_rsa_name = "Dummy RSA engine for testing";
>
> Here is my whole *openssl.cnf* file content
>
> =============================================================================================================================
>
> #
> # OpenSSL example configuration file.
> # This is mostly being used for generation of certificate requests.
> #
>
> # Note that you can include other files from the main configuration
> # file using the .include directive.
> #.include filename
>
> # This definition stops the following lines choking if HOME isn't
> # defined.
> HOME = .
>
> openssl_conf = openssl_def
>
> [openssl_def]
> engines = engine_section
>
> [engine_section]
> rsa-engine-new = rsa_section
>
> [rsa_section]
> engine_id = rsa-engine-new
>
> # Extra OBJECT IDENTIFIER info:
> #oid_file = $ENV::HOME/.oid
> oid_section = new_oids
>
> # To use this configuration file with the "-extfile" option of the
> # "openssl x509" utility, name here the section containing the
> # X.509v3 extensions to use:
> # extensions =
> # (Alternatively, use a configuration file that has only
> # X.509v3 extensions in its main [= default] section.)
>
> [ new_oids ]
>
> # We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
> # Add a simple OID like this:
> # testoid1=1.2.3.4
> # Or use config file substitution like this:
> # testoid2=${testoid1}.5.6
>
> # Policies used by the TSA examples.
> tsa_policy1 = 1.2.3.4.1
> tsa_policy2 = 1.2.3.4.5.6
> tsa_policy3 = 1.2.3.4.5.7
>
> ####################################################################
> [ ca ]
> default_ca = CA_default # The default ca section
>
> ####################################################################
> [ CA_default ]
>
> dir = ./demoCA # Where everything is kept
> certs = $dir/certs # Where the issued certs are kept
> crl_dir = $dir/crl # Where the issued crl are kept
> database = $dir/index.txt # database index file.
> #unique_subject = no # Set to 'no' to allow creation of
> # several certs with same subject.
> new_certs_dir = $dir/newcerts # default place for new certs.
>
> certificate = $dir/cacert.pem # The CA certificate
> serial = $dir/serial # The current serial number
> crlnumber = $dir/crlnumber # the current crl number
> # must be commented out to leave a V1 CRL
> crl = $dir/crl.pem # The current CRL
> private_key = $dir/private/cakey.pem# The private key
>
> x509_extensions = usr_cert # The extensions to add to the cert
>
> # Comment out the following two lines for the "traditional"
> # (and highly broken) format.
> name_opt = ca_default # Subject Name options
> cert_opt = ca_default # Certificate field options
>
> # Extension copying option: use with caution.
> # copy_extensions = copy
>
> # Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
> # so this is commented out by default to leave a V1 CRL.
> # crlnumber must also be commented out to leave a V1 CRL.
> # crl_extensions = crl_ext
>
> default_days = 365 # how long to certify for
> default_crl_days= 30 # how long before next CRL
> default_md = default # use public key default MD
> preserve = no # keep passed DN ordering
>
> # A few difference way of specifying how similar the request should look
> # For type CA, the listed attributes must be the same, and the optional
> # and supplied fields are just that :-)
> policy = policy_match
>
> # For the CA policy
> [ policy_match ]
> countryName = match
> stateOrProvinceName = optional
> organizationName = optional
> organizationalUnitName = optional
> commonName = supplied
> emailAddress = optional
>
> # For the 'anything' policy
> # At this point in time, you must list all acceptable 'object'
> # types.
> [ policy_anything ]
> countryName = optional
> stateOrProvinceName = optional
> localityName = optional
> organizationName = optional
> organizationalUnitName = optional
> commonName = supplied
> emailAddress = optional
>
> ####################################################################
> [ req ]
> default_bits = 2048
> default_keyfile = privkey.pem
> distinguished_name = req_distinguished_name
> attributes = req_attributes
> x509_extensions = v3_ca # The extensions to add to the self signed cert
>
> # Passwords for private keys if not present they will be prompted for
> # input_password = secret
> # output_password = secret
>
> # This sets a mask for permitted string types. There are several options.
> # default: PrintableString, T61String, BMPString.
> # pkix : PrintableString, BMPString (PKIX recommendation before 2004)
> # utf8only: only UTF8Strings (PKIX recommendation after 2004).
> # nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
> # MASK:XXXX a literal mask value.
> # WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
> string_mask = utf8only
>
> # req_extensions = v3_req # The extensions to add to a certificate request
>
> [ req_distinguished_name ]
> countryName = Country Name (2 letter code)
> countryName_default = AU
> countryName_min = 2
> countryName_max = 2
>
> stateOrProvinceName = State or Province Name (full name)
> stateOrProvinceName_default = Some-State
>
> localityName = Locality Name (eg, city)
>
> 0.organizationName = Organization Name (eg, company)
> 0.organizationName_default = Internet Widgits Pty Ltd
>
> # we can do this but it is not needed normally :-)
> #1.organizationName = Second Organization Name (eg, company)
> #1.organizationName_default = World Wide Web Pty Ltd
>
> organizationalUnitName = Organizational Unit Name (eg, section)
> #organizationalUnitName_default =
>
> commonName = Common Name (e.g. server FQDN or YOUR name)
> commonName_max = 64
>
> emailAddress = Email Address
> emailAddress_max = 64
>
> # SET-ex3 = SET extension number 3
>
> [ req_attributes ]
> challengePassword = A challenge password
> challengePassword_min = 4
> challengePassword_max = 20
>
> unstructuredName = An optional company name
>
> [ usr_cert ]
>
> # These extensions are added when 'ca' signs a request.
>
> # This goes against PKIX guidelines but some CAs do it and some software
> # requires this to avoid interpreting an end user certificate as a CA.
>
> basicConstraints=CA:FALSE
>
> # Here are some examples of the usage of nsCertType. If it is omitted
> # the certificate can be used for anything *except* object signing.
>
> # This is OK for an SSL server.
> # nsCertType = server
>
> # For an object signing certificate this would be used.
> # nsCertType = objsign
>
> # For normal client use this is typical
> # nsCertType = client, email
>
> # and for everything including object signing:
> # nsCertType = client, email, objsign
>
> # This is typical in keyUsage for a client certificate.
> # keyUsage = nonRepudiation, digitalSignature, keyEncipherment
>
> # This will be displayed in Netscape's comment listbox.
> nsComment = "OpenSSL Generated Certificate"
>
> # PKIX recommendations harmless if included in all certificates.
> subjectKeyIdentifier=hash
> authorityKeyIdentifier=keyid,issuer
>
> # This stuff is for subjectAltName and issuerAltname.
> # Import the email address.
> # subjectAltName=email:copy
> # An alternative to produce certificates that aren't
> # deprecated according to PKIX.
> # subjectAltName=email:move
>
> # Copy subject details
> # issuerAltName=issuer:copy
>
> #nsCaRevocationUrl = http://www.domain.dom/ca-crl.pem
> #nsBaseUrl
> #nsRevocationUrl
> #nsRenewalUrl
> #nsCaPolicyUrl
> #nsSslServerName
>
> # This is required for TSA certificates.
> # extendedKeyUsage = critical,timeStamping
>
> [ v3_req ]
>
> # Extensions to add to a certificate request
>
> basicConstraints = CA:FALSE
> keyUsage = nonRepudiation, digitalSignature, keyEncipherment
>
> [ v3_ca ]
>
>
> # Extensions for a typical CA
>
>
> # PKIX recommendation.
>
> subjectKeyIdentifier=hash
>
> authorityKeyIdentifier=keyid:always,issuer
>
> basicConstraints = critical,CA:true
>
> # Key usage: this is typical for a CA certificate. However since it will
> # prevent it being used as an test self-signed certificate it is best
> # left out by default.
> # keyUsage = cRLSign, keyCertSign
>
> # Some might want this also
> # nsCertType = sslCA, emailCA
>
> # Include email address in subject alt name: another PKIX recommendation
> # subjectAltName=email:copy
> # Copy issuer details
> # issuerAltName=issuer:copy
>
> # DER hex encoding of an extension: beware experts only!
> # obj=DER:02:03
> # Where 'obj' is a standard or added object
> # You can even override a supported extension:
> # basicConstraints= critical, DER:30:03:01:01:FF
>
> [ crl_ext ]
>
> # CRL extensions.
> # Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
>
> # issuerAltName=issuer:copy
> authorityKeyIdentifier=keyid:always
>
> [ proxy_cert_ext ]
> # These extensions should be added when creating a proxy certificate
>
> # This goes against PKIX guidelines but some CAs do it and some software
> # requires this to avoid interpreting an end user certificate as a CA.
>
> basicConstraints=CA:FALSE
>
> # Here are some examples of the usage of nsCertType. If it is omitted
> # the certificate can be used for anything *except* object signing.
>
> # This is OK for an SSL server.
> # nsCertType = server
>
> # For an object signing certificate this would be used.
> # nsCertType = objsign
>
> # For normal client use this is typical
> # nsCertType = client, email
>
> # and for everything including object signing:
> # nsCertType = client, email, objsign
>
> # This is typical in keyUsage for a client certificate.
> # keyUsage = nonRepudiation, digitalSignature, keyEncipherment
>
> # This will be displayed in Netscape's comment listbox.
> nsComment = "OpenSSL Generated Certificate"
>
> # PKIX recommendations harmless if included in all certificates.
> subjectKeyIdentifier=hash
> authorityKeyIdentifier=keyid,issuer
>
> # This stuff is for subjectAltName and issuerAltname.
> # Import the email address.
> # subjectAltName=email:copy
> # An alternative to produce certificates that aren't
> # deprecated according to PKIX.
> # subjectAltName=email:move
>
> # Copy subject details
> # issuerAltName=issuer:copy
>
> #nsCaRevocationUrl = http://www.domain.dom/ca-crl.pem
> #nsBaseUrl
> #nsRevocationUrl
> #nsRenewalUrl
> #nsCaPolicyUrl
> #nsSslServerName
>
> # This really needs to be in place for it to be a proxy certificate.
> proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
>
> ####################################################################
> [ tsa ]
>
> default_tsa = tsa_config1 # the default TSA section
>
> [ tsa_config1 ]
>
> # These are used by the TSA reply generation only.
> dir = ./demoCA # TSA root directory
> serial = $dir/tsaserial # The current serial number (mandatory)
> crypto_device = builtin # OpenSSL engine to use for signing
> signer_cert = $dir/tsacert.pem # The TSA signing certificate
> # (optional)
> certs = $dir/cacert.pem # Certificate chain to include in reply
> # (optional)
> signer_key = $dir/private/tsakey.pem # The TSA private key (optional)
> signer_digest = sha256 # Signing digest to use. (Optional)
> default_policy = tsa_policy1 # Policy if request did not specify it
> # (optional)
> other_policies = tsa_policy2, tsa_policy3 # acceptable policies (optional)
> digests = sha1, sha256, sha384, sha512 # Acceptable message digests
> (mandatory)
> accuracy = secs:1, millisecs:500, microsecs:100 # (optional)
> clock_precision_digits = 0 # number of digits after dot. (optional)
> ordering = yes # Is ordering defined for timestamps?
> # (optional, default: no)
> tsa_name = yes # Must the TSA name be included in the reply?
> # (optional, default: no)
> ess_cert_id_chain = no # Must the ESS cert id chain be included?
> # (optional, default: no)
> ess_cert_id_alg = sha1 # algorithm to compute certificate
> # identifier (optional, default: sha1)
>
>
> On Thu, Aug 26, 2021 at 7:39 AM Dmitry Belyavsky <beldmit at gmail.com>
> wrote:
>
>> Dear Shariful,
>>
>> 1. Don't hurry :)
>> 2. It looks like there are some more configuration options in your
>> openssl.cnf [rsa_section]
>> I think they came from the standard configuration. So if I am wrong,
>> please provide the whole file.
>> 3. I'd recommend you also update the lines
>> `
>> static const char *engine_dasync_id = "dasync";
>> static const char *engine_dasync_name = "Dummy Async engine support";
>> `
>> To be consistent with your engine name
>>
>> On Thu, Aug 26, 2021 at 3:24 PM Shariful Alam <dipto181 at gmail.com> wrote:
>>
>>> Any help regarding this matter??
>>>
>>> Regards,
>>> Shariful
>>>
>>> On Thu, Aug 26, 2021, 12:06 AM Shariful Alam <dipto181 at gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> I have a simple rsa engine code (from engines/e_dasync.c). My code
>>>> compiles. Command "*$openssl engine -t -c*" shows the following,
>>>>
>>>>
>>>> openssl engine -t -c
>>>>
>>>> (rdrand) Intel RDRAND engine
>>>>
>>>> [RAND]
>>>>
>>>> [ available ]
>>>>
>>>> (dynamic) Dynamic engine loading support
>>>>
>>>> [ unavailable ]
>>>>
>>>> (dasync) Dummy Async engine support
>>>>
>>>> [RSA]
>>>>
>>>> [ available ]
>>>>
>>>>
>>>> I also modify *openssl.cnf* configuration as following to load this
>>>> engine,
>>>>
>>>>
>>>> openssl_conf = openssl_def
>>>>
>>>>
>>>> [openssl_def]
>>>>
>>>> engines = engine_section
>>>>
>>>>
>>>> [engine_section]
>>>>
>>>> rsa-engine-new = rsa_section
>>>>
>>>>
>>>> [rsa_section]
>>>>
>>>> engine_id = rsa-engine-new
>>>>
>>>>
>>>> Then when I run the command "$*openssl engine*", I get the following
>>>> error,
>>>>
>>>> $openssl engine
>>>>
>>>> (rdrand) Intel RDRAND engine
>>>>
>>>> (dynamic) Dynamic engine loading support
>>>>
>>>> (dasync) Dummy Async engine support
>>>>
>>>> 139633213376256:error:260AB089:engine
>>>> routines:ENGINE_ctrl_cmd_string:invalid cmd
>>>> name:crypto/engine/eng_ctrl.c:255:
>>>>
>>>> 139633213376256:error:260BC066:engine
>>>> routines:int_engine_configure:engine configuration
>>>> error:crypto/engine/eng_cnf.c:141:section=rsa_section, name=oid_section,
>>>> value=new_oids
>>>>
>>>> 139633213376256:error:0E07606D:configuration file
>>>> routines:module_run:module initialization
>>>> error:crypto/conf/conf_mod.c:177:module=engines, value=engine_section,
>>>> retcode=-1
>>>>
>>>>
>>>> Any help why is this happening? How can I fix this?
>>>>
>>>> My goal is to use my OpenSSL engine with Apache for mod_ssl. Do I have
>>>> to compile my engine with the OpenSSL source code to do that?
>>>>
>>>>
>>>> Here is the complete source code of my sample engine,
>>>>
>>>> ==============================================
>>>>
>>>>
>>>> #include <stdio.h>
>>>>
>>>> #include <string.h>
>>>>
>>>>
>>>> #include <openssl/engine.h>
>>>>
>>>> #include <openssl/sha.h>
>>>>
>>>> #include <openssl/aes.h>
>>>>
>>>> #include <openssl/rsa.h>
>>>>
>>>> #include <openssl/evp.h>
>>>>
>>>> #include <openssl/async.h>
>>>>
>>>> #include <openssl/bn.h>
>>>>
>>>> #include <openssl/crypto.h>
>>>>
>>>> #include <openssl/ssl.h>
>>>>
>>>> #include <openssl/modes.h>
>>>>
>>>>
>>>> /* Engine Id and Name */
>>>>
>>>> static const char *engine_dasync_id = "dasync";
>>>>
>>>> static const char *engine_dasync_name = "Dummy Async engine support";
>>>>
>>>>
>>>> static int dasync_pub_enc(int flen, const unsigned char *from,
>>>>
>>>> unsigned char *to, RSA *rsa, int padding) {
>>>>
>>>> printf("dasync_pub_enc\n");
>>>>
>>>>
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>>
>>>> static int dasync_pub_dec(int flen, const unsigned char *from,
>>>>
>>>> unsigned char *to, RSA *rsa, int padding) {
>>>>
>>>> printf("dasync_pub_dec\n");
>>>>
>>>>
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>>
>>>> static int dasync_rsa_priv_enc(int flen, const unsigned char *from,
>>>> unsigned char *to, RSA *rsa, int padding){
>>>>
>>>> printf("dasync_rsa_priv_enc\n");
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>>
>>>> static int dasync_rsa_priv_dec(int flen, const unsigned char *from,
>>>> unsigned char *to, RSA *rsa, int padding){
>>>>
>>>> printf("dasync_rsa_priv_dec\n");
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>>
>>>>
>>>> static RSA_METHOD *dasync_rsa_method = NULL;
>>>>
>>>>
>>>>
>>>> static int bind_dasync(ENGINE *e){
>>>>
>>>> /* Setup RSA_METHOD */
>>>>
>>>> if ((dasync_rsa_method = RSA_meth_new("Dummy Async RSA method", 0))
>>>> == NULL
>>>>
>>>> || RSA_meth_set_pub_enc(dasync_rsa_method, dasync_pub_enc) == 0
>>>>
>>>> || RSA_meth_set_pub_dec(dasync_rsa_method, dasync_pub_dec) == 0
>>>>
>>>> || RSA_meth_set_priv_enc(dasync_rsa_method,
>>>> dasync_rsa_priv_enc) == 0
>>>>
>>>> || RSA_meth_set_priv_dec(dasync_rsa_method,
>>>> dasync_rsa_priv_dec) == 0
>>>>
>>>> ) {
>>>>
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>>
>>>> /* Ensure the dasync error handling is set up */
>>>>
>>>>
>>>>
>>>> if (!ENGINE_set_id(e, engine_dasync_id)
>>>>
>>>> || !ENGINE_set_name(e, engine_dasync_name)
>>>>
>>>> || !ENGINE_set_RSA(e, dasync_rsa_method)
>>>>
>>>> ) {
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>> return 1;
>>>>
>>>> }
>>>>
>>>>
>>>> static int bind_helper(ENGINE *e, const char *id){
>>>>
>>>> if (!bind_dasync(e)){
>>>>
>>>> printf("2_Error: Inside Bind helper\n");
>>>>
>>>> return 0;
>>>>
>>>> }
>>>>
>>>> return 1;
>>>>
>>>> }
>>>>
>>>>
>>>> IMPLEMENT_DYNAMIC_BIND_FN(bind_helper)
>>>>
>>>> IMPLEMENT_DYNAMIC_CHECK_FN()
>>>>
>>>>
>>>> =============================================
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Thanks,
>>>>
>>>> Shariful
>>>>
>>>>
>>
>> --
>> SY, Dmitry Belyavsky
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mta.openssl.org/pipermail/openssl-users/attachments/20210826/0f9b0ece/attachment-0001.html>
More information about the openssl-users
mailing list