[openssl-commits] [openssl] master update
Andy Polyakov
appro at openssl.org
Fri Nov 11 12:48:33 UTC 2016
The branch master has been updated
via 866e505e0d663158b0fe63a7fb7455eebacc6470 (commit)
from 79dfc3ddfd80cd4294136b19fa48037e149cbd9e (commit)
- Log -----------------------------------------------------------------
commit 866e505e0d663158b0fe63a7fb7455eebacc6470
Author: Andy Polyakov <appro at openssl.org>
Date: Fri Nov 4 12:24:14 2016 +0100
sha/asm/sha512-armv8.pl: add NEON version of SHA256.
This provides up to 30% better performance on some of recent processors.
Reviewed-by: Richard Levitte <levitte at openssl.org>
-----------------------------------------------------------------------
Summary of changes:
crypto/sha/asm/sha512-armv8.pl | 317 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 313 insertions(+), 4 deletions(-)
diff --git a/crypto/sha/asm/sha512-armv8.pl b/crypto/sha/asm/sha512-armv8.pl
index ffd80d6..ffae5f2 100644
--- a/crypto/sha/asm/sha512-armv8.pl
+++ b/crypto/sha/asm/sha512-armv8.pl
@@ -37,6 +37,20 @@
# indication of some compiler "pathology", most notably code
# generated with -mgeneral-regs-only is significanty faster
# and the gap is only 40-90%.
+#
+# October 2016.
+#
+# Originally it was reckoned that it makes no sense to implement NEON
+# version of SHA256 for 64-bit processors. This is because performance
+# improvement on most wide-spread Cortex-A5x processors was observed
+# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
+# observed that 32-bit NEON SHA256 performs significantly better than
+# 64-bit scalar version on *some* of the more recent processors. As
+# result 64-bit NEON version of SHA256 was added to provide best
+# all-round performance. For example it executes ~30% faster on X-Gene
+# and Mongoose. [For reference, NEON version of SHA512 is bound to
+# deliver much less improvement, likely *negative* on Cortex-A5x.
+# Which is why NEON support is limited to SHA256.]
$output=pop;
$flavour=pop;
@@ -195,6 +209,8 @@ $code.=<<___ if ($SZ==4);
ldr w16,[x16]
tst w16,#ARMV8_SHA256
b.ne .Lv8_entry
+ tst w16,#ARMV7_NEON
+ b.ne .Lneon_entry
#endif
___
$code.=<<___;
@@ -425,6 +441,296 @@ $code.=<<___;
___
}
+if ($SZ==4) { ######################################### NEON stuff #
+# You'll surely note a lot of similarities with sha256-armv4 module,
+# and of course it's not a coincidence. sha256-armv4 was used as
+# initial template, but was adapted for ARMv8 instruction set and
+# extensively re-tuned for all-round performance.
+
+my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
+my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
+my $Ktbl="x16";
+my $Xfer="x17";
+my @X = map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
+my $j=0;
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',', at _,$arg)."\n";
+}
+
+sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
+sub Dlo { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
+sub Dhi { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
+
+sub Xupdate()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ &ext_8 ($T0, at X[0], at X[1],4); # X[1..4]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ext_8 ($T3, at X[2], at X[3],4); # X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &mov (&Dscalar($T7),&Dhi(@X[3])); # X[14..15]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T2,$T0,$sigma0[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T1,$T0,$sigma0[2]);
+ eval(shift(@insns));
+ &add_32 (@X[0], at X[0],$T3); # X[0..3] += X[9..12]
+ eval(shift(@insns));
+ &sli_32 ($T2,$T0,32-$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T3,$T0,$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T1,$T1,$T2);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T3,$T0,32-$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T4,$T7,$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T1,$T1,$T3); # sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T4,$T7,32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T5,$T7,$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T3,$T7,$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0], at X[0],$T1); # X[0..3] += sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_u32 ($T3,$T7,32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T3); # sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0], at X[0],$T5); # X[0..1] += sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ushr_32 ($T6, at X[0],$sigma1[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T7, at X[0],$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T6, at X[0],32-$sigma1[0]);
+ eval(shift(@insns));
+ &ushr_32 ($T5, at X[0],$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T7,$T7,$T6);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &sli_32 ($T5, at X[0],32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_32 ("{$T0}","[$Ktbl], #16");
+ eval(shift(@insns));
+ &eor_8 ($T7,$T7,$T5); # sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &eor_8 ($T5,$T5,$T5);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &mov (&Dhi($T5), &Dlo($T7));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 (@X[0], at X[0],$T5); # X[2..3] += sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 ($T0,$T0, at X[0]);
+ while($#insns>=1) { eval(shift(@insns)); }
+ &st1_32 ("{$T0}","[$Xfer], #16");
+ eval(shift(@insns));
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_8 ("{@X[0]}","[$inp],#16");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &ld1_32 ("{$T0}","[$Ktbl],#16");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &rev32 (@X[0], at X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &add_32 ($T0,$T0, at X[0]);
+ foreach (@insns) { eval; } # remaining instructions
+ &st1_32 ("{$T0}","[$Xfer], #16");
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub body_00_15 () {
+ (
+ '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+ '&add ($h,$h,$t1)', # h+=X[i]+K[i]
+ '&add ($a,$a,$t4);'. # h+=Sigma0(a) from the past
+ '&and ($t1,$f,$e)',
+ '&bic ($t4,$g,$e)',
+ '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+ '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past
+ '&orr ($t1,$t1,$t4)', # Ch(e,f,g)
+ '&eor ($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e)
+ '&eor ($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+ '&add ($h,$h,$t1)', # h+=Ch(e,f,g)
+ '&ror ($t0,$t0,"#$Sigma1[0]")',
+ '&eor ($t2,$a,$b)', # a^b, b^c in next round
+ '&eor ($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a)
+ '&add ($h,$h,$t0)', # h+=Sigma1(e)
+ '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'.
+ '&ldr ($t1,"[$Ktbl]") if ($j==15);'.
+ '&and ($t3,$t3,$t2)', # (b^c)&=(a^b)
+ '&ror ($t4,$t4,"#$Sigma0[0]")',
+ '&add ($d,$d,$h)', # d+=h
+ '&eor ($t3,$t3,$b)', # Maj(a,b,c)
+ '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+ )
+}
+
+$code.=<<___;
+#ifdef __KERNEL__
+.globl sha256_block_neon
+#endif
+.type sha256_block_neon,%function
+.align 4
+sha256_block_neon:
+.Lneon_entry:
+ stp x29, x30, [sp, #-16]!
+ mov x29, sp
+ sub sp,sp,#16*4
+
+ adr $Ktbl,.LK256
+ add $num,$inp,$num,lsl#6 // len to point at the end of inp
+
+ ld1.8 {@X[0]},[$inp], #16
+ ld1.8 {@X[1]},[$inp], #16
+ ld1.8 {@X[2]},[$inp], #16
+ ld1.8 {@X[3]},[$inp], #16
+ ld1.32 {$T0},[$Ktbl], #16
+ ld1.32 {$T1},[$Ktbl], #16
+ ld1.32 {$T2},[$Ktbl], #16
+ ld1.32 {$T3},[$Ktbl], #16
+ rev32 @X[0], at X[0] // yes, even on
+ rev32 @X[1], at X[1] // big-endian
+ rev32 @X[2], at X[2]
+ rev32 @X[3], at X[3]
+ mov $Xfer,sp
+ add.32 $T0,$T0, at X[0]
+ add.32 $T1,$T1, at X[1]
+ add.32 $T2,$T2, at X[2]
+ st1.32 {$T0-$T1},[$Xfer], #32
+ add.32 $T3,$T3, at X[3]
+ st1.32 {$T2-$T3},[$Xfer]
+ sub $Xfer,$Xfer,#32
+
+ ldp $A,$B,[$ctx]
+ ldp $C,$D,[$ctx,#8]
+ ldp $E,$F,[$ctx,#16]
+ ldp $G,$H,[$ctx,#24]
+ ldr $t1,[sp,#0]
+ mov $t2,wzr
+ eor $t3,$B,$C
+ mov $t4,wzr
+ b .L_00_48
+
+.align 4
+.L_00_48:
+___
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+$code.=<<___;
+ cmp $t1,#0 // check for K256 terminator
+ ldr $t1,[sp,#0]
+ sub $Xfer,$Xfer,#64
+ bne .L_00_48
+
+ sub $Ktbl,$Ktbl,#256 // rewind $Ktbl
+ cmp $inp,$num
+ mov $Xfer, #64
+ csel $Xfer, $Xfer, xzr, eq
+ sub $inp,$inp,$Xfer // avoid SEGV
+ mov $Xfer,sp
+___
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+$code.=<<___;
+ add $A,$A,$t4 // h+=Sigma0(a) from the past
+ ldp $t0,$t1,[$ctx,#0]
+ add $A,$A,$t2 // h+=Maj(a,b,c) from the past
+ ldp $t2,$t3,[$ctx,#8]
+ add $A,$A,$t0 // accumulate
+ add $B,$B,$t1
+ ldp $t0,$t1,[$ctx,#16]
+ add $C,$C,$t2
+ add $D,$D,$t3
+ ldp $t2,$t3,[$ctx,#24]
+ add $E,$E,$t0
+ add $F,$F,$t1
+ ldr $t1,[sp,#0]
+ stp $A,$B,[$ctx,#0]
+ add $G,$G,$t2
+ mov $t2,wzr
+ stp $C,$D,[$ctx,#8]
+ add $H,$H,$t3
+ stp $E,$F,[$ctx,#16]
+ eor $t3,$B,$C
+ stp $G,$H,[$ctx,#24]
+ mov $t4,wzr
+ mov $Xfer,sp
+ b.ne .L_00_48
+
+ ldr x29,[x29]
+ add sp,sp,#16*4+16
+ ret
+.size sha256_block_neon,.-sha256_block_neon
+___
+}
+
$code.=<<___;
#ifndef __KERNEL__
.comm OPENSSL_armcap_P,4,4
@@ -456,12 +762,15 @@ close SELF;
foreach(split("\n",$code)) {
- s/\`([^\`]*)\`/eval($1)/geo;
+ s/\`([^\`]*)\`/eval($1)/ge;
+
+ s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
- s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/geo;
+ s/\bq([0-9]+)\b/v$1.16b/g; # old->new registers
- s/\.\w?32\b//o and s/\.16b/\.4s/go;
- m/(ld|st)1[^\[]+\[0\]/o and s/\.4s/\.s/go;
+ s/\.[ui]?8(\s)/$1/;
+ s/\.\w?32\b// and s/\.16b/\.4s/g;
+ m/(ld|st)1[^\[]+\[0\]/ and s/\.4s/\.s/g;
print $_,"\n";
}
More information about the openssl-commits
mailing list