[openssl-commits] [openssl] OpenSSL_1_1_0-stable update
Kurt Roeckx
kurt at openssl.org
Thu Jul 26 04:36:14 UTC 2018
The branch OpenSSL_1_1_0-stable has been updated
via 707efcd64129c8010e192bd209bace0bc6d18ac9 (commit)
via acaa6ae936194362cb8011a2c145eb87aae1d1fa (commit)
from e18da726ed60b502f19fa35fca20201759f371d9 (commit)
- Log -----------------------------------------------------------------
commit 707efcd64129c8010e192bd209bace0bc6d18ac9
Author: Kurt Roeckx <kurt at roeckx.be>
Date: Wed Jul 25 18:55:16 2018 +0200
Make number of Miller-Rabin tests for a prime tests depend on the security level of the prime
The old numbers where all generated for an 80 bit security level. But
the number should depend on security level you want to reach. For bigger
primes we want a higher security level and so need to do more tests.
Reviewed-by: Richard Levitte <levitte at openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre at ncp-e.com>
Reviewed-by: Paul Dale <paul.dale at oracle.com>
GH: #6075
Fixes: #6012
(cherry picked from commit feac7a1c8be49fbcb76fcb721ec9f02fdd91030e)
commit acaa6ae936194362cb8011a2c145eb87aae1d1fa
Author: Kurt Roeckx <kurt at roeckx.be>
Date: Wed Apr 25 21:47:20 2018 +0200
Change the number of Miller-Rabin test for DSA generation to 64
This changes the security level from 100 to 128 bit.
We only have 1 define, this sets it to the highest level supported for
DSA, and needed for keys larger than 3072 bit.
Reviewed-by: Richard Levitte <levitte at openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre at ncp-e.com>
Reviewed-by: Paul Dale <paul.dale at oracle.com>
GH: #6075
(cherry picked from commit 74ee379651fb2bb12c6f7eb9fa10e70be89ac7c8)
-----------------------------------------------------------------------
Summary of changes:
CHANGES | 10 +++++
doc/crypto/BN_generate_prime.pod | 12 +++++-
include/openssl/bn.h | 87 +++++++++++++++++++++++++++++++---------
include/openssl/dsa.h | 8 ++--
4 files changed, 95 insertions(+), 22 deletions(-)
diff --git a/CHANGES b/CHANGES
index b16a1be..148960a 100644
--- a/CHANGES
+++ b/CHANGES
@@ -9,6 +9,16 @@
Changes between 1.1.0h and 1.1.0i [xx XXX xxxx]
+ *) Change generating and checking of primes so that the error rate of not
+ being prime depends on the intended use based on the size of the input.
+ For larger primes this will result in more rounds of Miller-Rabin.
+ The maximal error rate for primes with more than 1080 bits is lowered
+ to 2^-128.
+ [Kurt Roeckx, Annie Yousar]
+
+ *) Increase the number of Miller-Rabin rounds for DSA key generating to 64.
+ [Kurt Roeckx]
+
*) Add blinding to ECDSA and DSA signatures to protect against side channel
attacks discovered by Keegan Ryan (NCC Group).
[Matt Caswell]
diff --git a/doc/crypto/BN_generate_prime.pod b/doc/crypto/BN_generate_prime.pod
index c97536b..4adc3c8 100644
--- a/doc/crypto/BN_generate_prime.pod
+++ b/doc/crypto/BN_generate_prime.pod
@@ -100,7 +100,17 @@ If B<do_trial_division == 0>, this test is skipped.
Both BN_is_prime_ex() and BN_is_prime_fasttest_ex() perform a Miller-Rabin
probabilistic primality test with B<nchecks> iterations. If
B<nchecks == BN_prime_checks>, a number of iterations is used that
-yields a false positive rate of at most 2^-80 for random input.
+yields a false positive rate of at most 2^-64 for random input.
+The error rate depends on the size of the prime and goes down for bigger primes.
+The rate is 2^-80 starting at 308 bits, 2^-112 at 852 bit, 2^-128 at 1080 bits,
+2^-192 at 3747 bit and 2^-256 at 6394 bit.
+
+When the source of the prime is not random or not trusted, the number
+of checks needs to be much higher to reach the same level of assurance:
+It should equal half of the targeted security level in bits (rounded up to the
+next integer if necessary).
+For instance, to reach the 128 bit security level, B<nchecks> should be set to
+64.
If B<cb> is not B<NULL>, B<BN_GENCB_call(cb, 1, j)> is called
after the j-th iteration (j = 0, 1, ...). B<ctx> is a
diff --git a/include/openssl/bn.h b/include/openssl/bn.h
index 54ae760..7b2e4fa 100644
--- a/include/openssl/bn.h
+++ b/include/openssl/bn.h
@@ -119,25 +119,76 @@ void *BN_GENCB_get_arg(BN_GENCB *cb);
* on the size of the number */
/*
- * number of Miller-Rabin iterations for an error rate of less than 2^-80 for
- * random 'b'-bit input, b >= 100 (taken from table 4.4 in the Handbook of
- * Applied Cryptography [Menezes, van Oorschot, Vanstone; CRC Press 1996];
- * original paper: Damgaard, Landrock, Pomerance: Average case error
- * estimates for the strong probable prime test. -- Math. Comp. 61 (1993)
- * 177-194)
+ * BN_prime_checks_for_size() returns the number of Miller-Rabin iterations
+ * that will be done for checking that a random number is probably prime. The
+ * error rate for accepting a composite number as prime depends on the size of
+ * the prime |b|. The error rates used are for calculating an RSA key with 2 primes,
+ * and so the level is what you would expect for a key of double the size of the
+ * prime.
+ *
+ * This table is generated using the algorithm of FIPS PUB 186-4
+ * Digital Signature Standard (DSS), section F.1, page 117.
+ * (https://dx.doi.org/10.6028/NIST.FIPS.186-4)
+ *
+ * The following magma script was used to generate the output:
+ * securitybits:=125;
+ * k:=1024;
+ * for t:=1 to 65 do
+ * for M:=3 to Floor(2*Sqrt(k-1)-1) do
+ * S:=0;
+ * // Sum over m
+ * for m:=3 to M do
+ * s:=0;
+ * // Sum over j
+ * for j:=2 to m do
+ * s+:=(RealField(32)!2)^-(j+(k-1)/j);
+ * end for;
+ * S+:=2^(m-(m-1)*t)*s;
+ * end for;
+ * A:=2^(k-2-M*t);
+ * B:=8*(Pi(RealField(32))^2-6)/3*2^(k-2)*S;
+ * pkt:=2.00743*Log(2)*k*2^-k*(A+B);
+ * seclevel:=Floor(-Log(2,pkt));
+ * if seclevel ge securitybits then
+ * printf "k: %5o, security: %o bits (t: %o, M: %o)\n",k,seclevel,t,M;
+ * break;
+ * end if;
+ * end for;
+ * if seclevel ge securitybits then break; end if;
+ * end for;
+ *
+ * It can be run online at:
+ * http://magma.maths.usyd.edu.au/calc
+ *
+ * And will output:
+ * k: 1024, security: 129 bits (t: 6, M: 23)
+ *
+ * k is the number of bits of the prime, securitybits is the level we want to
+ * reach.
+ *
+ * prime length | RSA key size | # MR tests | security level
+ * -------------+--------------|------------+---------------
+ * (b) >= 6394 | >= 12788 | 3 | 256 bit
+ * (b) >= 3747 | >= 7494 | 3 | 192 bit
+ * (b) >= 1345 | >= 2690 | 4 | 128 bit
+ * (b) >= 1080 | >= 2160 | 5 | 128 bit
+ * (b) >= 852 | >= 1704 | 5 | 112 bit
+ * (b) >= 476 | >= 952 | 5 | 80 bit
+ * (b) >= 400 | >= 800 | 6 | 80 bit
+ * (b) >= 347 | >= 694 | 7 | 80 bit
+ * (b) >= 308 | >= 616 | 8 | 80 bit
+ * (b) >= 55 | >= 110 | 27 | 64 bit
+ * (b) >= 6 | >= 12 | 34 | 64 bit
*/
-# define BN_prime_checks_for_size(b) ((b) >= 1300 ? 2 : \
- (b) >= 850 ? 3 : \
- (b) >= 650 ? 4 : \
- (b) >= 550 ? 5 : \
- (b) >= 450 ? 6 : \
- (b) >= 400 ? 7 : \
- (b) >= 350 ? 8 : \
- (b) >= 300 ? 9 : \
- (b) >= 250 ? 12 : \
- (b) >= 200 ? 15 : \
- (b) >= 150 ? 18 : \
- /* b >= 100 */ 27)
+
+# define BN_prime_checks_for_size(b) ((b) >= 3747 ? 3 : \
+ (b) >= 1345 ? 4 : \
+ (b) >= 476 ? 5 : \
+ (b) >= 400 ? 6 : \
+ (b) >= 347 ? 7 : \
+ (b) >= 308 ? 8 : \
+ (b) >= 55 ? 27 : \
+ /* b >= 6 */ 34)
# define BN_num_bytes(a) ((BN_num_bits(a)+7)/8)
diff --git a/include/openssl/dsa.h b/include/openssl/dsa.h
index e75c839..3bd5f17 100644
--- a/include/openssl/dsa.h
+++ b/include/openssl/dsa.h
@@ -146,10 +146,12 @@ int DSAparams_print_fp(FILE *fp, const DSA *x);
int DSA_print_fp(FILE *bp, const DSA *x, int off);
# endif
-# define DSS_prime_checks 50
+# define DSS_prime_checks 64
/*
- * Primality test according to FIPS PUB 186[-1], Appendix 2.1: 50 rounds of
- * Rabin-Miller
+ * Primality test according to FIPS PUB 186-4, Appendix C.3. Since we only
+ * have one value here we set the number of checks to 64 which is the 128 bit
+ * security level that is the highest level and valid for creating a 3072 bit
+ * DSA key.
*/
# define DSA_is_prime(n, callback, cb_arg) \
BN_is_prime(n, DSS_prime_checks, callback, NULL, cb_arg)
More information about the openssl-commits
mailing list