[openssl] master update
Richard Levitte
levitte at openssl.org
Fri Feb 12 14:57:58 UTC 2021
The branch master has been updated
via d8c1cafbbc5dfe2347a7157178db5b50fdf9d248 (commit)
via 72ddea9b817e9b787e58d5b7ca8b7b8e6351f06e (commit)
from 1695e10e402a2d25e57df2ac709d6265f3a2533f (commit)
- Log -----------------------------------------------------------------
commit d8c1cafbbc5dfe2347a7157178db5b50fdf9d248
Author: Richard Levitte <levitte at openssl.org>
Date: Mon Jan 11 08:51:43 2021 +0100
VMS documentation fixes
This mostly clarifies details.
Fixes #13789
Reviewed-by: Tomas Mraz <tomas at openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13835)
commit 72ddea9b817e9b787e58d5b7ca8b7b8e6351f06e
Author: Richard Levitte <levitte at openssl.org>
Date: Mon Jan 11 08:31:21 2021 +0100
Configurations/descrip.mms.tmpl: avoid enormous PIPE commands
DCL has a total command line limitation that's too easily broken by
them.
We solve them by creating separate message scripts and using them.
Fixes #13789
Reviewed-by: Tomas Mraz <tomas at openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13835)
-----------------------------------------------------------------------
Summary of changes:
Configurations/descrip.mms.tmpl | 35 +++++++++++++----------------------
INSTALL.md | 12 ++++++------
NOTES-VMS.md | 11 +++++++++--
VMS/msg_install.com | 19 +++++++++++++++++++
VMS/msg_staging.com | 37 +++++++++++++++++++++++++++++++++++++
5 files changed, 84 insertions(+), 30 deletions(-)
create mode 100644 VMS/msg_install.com
create mode 100644 VMS/msg_staging.com
diff --git a/Configurations/descrip.mms.tmpl b/Configurations/descrip.mms.tmpl
index a2f3293c54..3f015a0eb5 100644
--- a/Configurations/descrip.mms.tmpl
+++ b/Configurations/descrip.mms.tmpl
@@ -392,8 +392,13 @@ NODEBUG=@
$(NODEBUG) !
$(NODEBUG) ! Installation logical names
$(NODEBUG) !
- $(NODEBUG) installtop = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
- $(NODEBUG) datatop = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;" + ".]"
+ $(NODEBUG) ! This also creates a few DCL variables that are used for
+ $(NODEBUG) ! the "install_msg" target.
+ $(NODEBUG) !
+ $(NODEBUG) installroot = F$PARSE(staging_instdir,"$(INSTALLTOP)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;"
+ $(NODEBUG) installtop = installroot + ".]"
+ $(NODEBUG) dataroot = F$PARSE(staging_datadir,"$(OPENSSLDIR)","[]A.;",,"SYNTAX_ONLY,NO_CONCEAL") - ".][000000" - "[000000." - "][" - "]A.;"
+ $(NODEBUG) datatop = dataroot + ".]"
$(NODEBUG) DEFINE ossl_installroot 'installtop'
$(NODEBUG) DEFINE ossl_dataroot 'datatop'
$(NODEBUG) !
@@ -468,32 +473,18 @@ list-tests :
@ WRITE SYS$OUTPUT "Tests are not supported with your chosen Configure options"
@ ! {- output_on() if !$disabled{tests}; "" -}
-install : install_sw install_ssldirs install_docs install_final
+install : install_sw install_ssldirs install_docs install_msg
-install_final :
+install_msg :
@ WRITE SYS$OUTPUT ""
@ WRITE SYS$OUTPUT "######################################################################"
@ WRITE SYS$OUTPUT ""
@ IF "$(DESTDIR)" .EQS. "" THEN -
- PIPE ( WRITE SYS$OUTPUT "Installation complete" ; -
- WRITE SYS$OUTPUT "" ; -
- WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
- WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
- WRITE SYS$OUTPUT "" )
+ @{- sourcefile("VMS", "msg_install.com") -} "$(SYSTARTUP)" "{- $osslver -}"
@ IF "$(DESTDIR)" .NES. "" THEN -
- PIPE ( WRITE SYS$OUTPUT "Staging installation complete" ; -
- WRITE SYS$OUTPUT "" ; -
- WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the directory tree" ; -
- WRITE SYS$OUTPUT staging_instdir ; -
- WRITE SYS$OUTPUT "ends up in $(INSTALLTOP)," ; -
- WRITE SYS$OUTPUT "and that the contents of the contents of the directory tree" ; -
- WRITE SYS$OUTPUT staging_datadir ; -
- WRITE SYS$OUTPUT "ends up in $(OPENSSLDIR)" ; -
- WRITE SYS$OUTPUT "" ; -
- WRITE SYS$OUTPUT "When in its final destination," ; -
- WRITE SYS$OUTPUT "Run @$(SYSTARTUP)openssl_startup{- $osslver -} to set up logical names" ; -
- WRITE SYS$OUTPUT "then run @$(SYSTARTUP)openssl_utils{- $osslver -} to define commands" ; -
- WRITE SYS$OUTPUT "" )
+ @{- sourcefile("VMS", "msg_staging.com") -} -
+ "''installroot']" "''dataroot']" "$(INSTALLTOP)" "$(OPENSSLDIR)" -
+ "$(SYSTARTUP)" "{- $osslver -}"
check_install :
spawn/nolog @ossl_installroot:[SYSTEST]openssl_ivp{- $osslver -}.com
diff --git a/INSTALL.md b/INSTALL.md
index d9aa5c47c2..eec2f3a2b3 100644
--- a/INSTALL.md
+++ b/INSTALL.md
@@ -234,10 +234,7 @@ Use the following command to install OpenSSL.
By default, OpenSSL will be installed to
- SYS$COMMON:[OPENSSL-'version'...]
-
-where 'version' is the OpenSSL version number with underscores instead
-of periods.
+ SYS$COMMON:[OPENSSL]
### Windows
@@ -266,6 +263,9 @@ To install OpenSSL to a different location (for example into your home
directory for testing purposes) run `Configure` as shown in the following
examples.
+The options `--prefix` and `--openssldir` are explained in further detail in
+[Directories](#directories) below, and the values used here are mere examples.
+
On Unix:
$ ./Configure --prefix=/opt/openssl --openssldir=/usr/local/ssl
@@ -375,7 +375,7 @@ The top of the installation directory tree. Defaults are:
Unix: /usr/local
Windows: C:\Program Files\OpenSSL
- OpenVMS: SYS$COMMON:[OPENSSL-'version']
+ OpenVMS: SYS$COMMON:[OPENSSL]
Compiler Warnings
-----------------
@@ -1289,7 +1289,7 @@ its default):
### OpenVMS
-'arch' is replaced with the architecture name, `Alpha` or `ia64`,
+'arch' is replaced with the architecture name, `ALPHA` or `IA64`,
'sover' is replaced with the shared library version (`0101` for 1.1), and
'pz' is replaced with the pointer size OpenSSL was built with:
diff --git a/NOTES-VMS.md b/NOTES-VMS.md
index c317e82de2..ebb1e8e152 100644
--- a/NOTES-VMS.md
+++ b/NOTES-VMS.md
@@ -84,9 +84,9 @@ NOTES FOR THE OPENVMS PLATFORM
Unix mount point.
The easiest way to check if everything got through as it should is to
- check for one of the following files:
+ check that this file exists:
- [.crypto]opensslconf^.h.in
+ [.include.openssl]configuration^.h.in
The best way to get a correct distribution is to download the gzipped
tar file from ftp://ftp.openssl.org/source/, use `GZIP -d` to uncompress
@@ -99,3 +99,10 @@ NOTES FOR THE OPENVMS PLATFORM
Should you need it, you can find UnZip for VMS here:
<http://www.info-zip.org/UnZip.html>
+
+ How the value of 'arch' is determined
+ -------------------------------------
+
+ 'arch' is mentioned in INSTALL. It's value is determined like this:
+
+ arch = f$edit( f$getsyi( "arch_name"), "upcase")
diff --git a/VMS/msg_install.com b/VMS/msg_install.com
new file mode 100644
index 0000000000..d1eec7c982
--- /dev/null
+++ b/VMS/msg_install.com
@@ -0,0 +1,19 @@
+$ ! Used by the main descrip.mms to print the installation complete
+$ ! message.
+$ ! Arguments:
+$ ! P1 startup / setup / shutdown scripts directory
+$ ! P2 distinguishing version number ("major version")
+$
+$ systartup = p1
+$ osslver = p2
+$
+$ WRITE SYS$OUTPUT "Installation complete"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The following commands need to be executed to enable you to use OpenSSL:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "- to set up OpenSSL logical names:"
+$ WRITE SYS$OUTPUT " @''systartup'openssl_startup''osslver'"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "- to define the OpenSSL command"
+$ WRITE SYS$OUTPUT " @''systartup'openssl_utils''osslver'"
+$ WRITE SYS$OUTPUT ""
diff --git a/VMS/msg_staging.com b/VMS/msg_staging.com
new file mode 100644
index 0000000000..11cd80870d
--- /dev/null
+++ b/VMS/msg_staging.com
@@ -0,0 +1,37 @@
+$ ! Used by the main descrip.mms to print the statging installation
+$ ! complete
+$ ! message.
+$ ! Arguments:
+$ ! P1 staging software installation directory
+$ ! P2 staging data installation directory
+$ ! P3 final software installation directory
+$ ! P4 final data installation directory
+$ ! P5 startup / setup / shutdown scripts directory
+$ ! P6 distinguishing version number ("major version")
+$
+$ staging_instdir = p1
+$ staging_datadir = p2
+$ final_instdir = p3
+$ final_datadir = p4
+$ systartup = p5
+$ osslver = p6
+$
+$ WRITE SYS$OUTPUT "Staging installation complete"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Finish or package in such a way that the contents of the following directory"
+$ WRITE SYS$OUTPUT "trees end up being copied:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "- from ", staging_instdir
+$ WRITE SYS$OUTPUT " to ", final_instdir
+$ WRITE SYS$OUTPUT "- from ", staging_datadir
+$ WRITE SYS$OUTPUT " to ", final_datadir
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "When in its final destination, the following commands need to be executed"
+$ WRITE SYS$OUTPUT "to use OpenSSL:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "- to set up OpenSSL logical names:"
+$ WRITE SYS$OUTPUT " @''systartup'openssl_startup''osslver'"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "- to define the OpenSSL command"
+$ WRITE SYS$OUTPUT " @''systartup'openssl_utils''osslver'"
+$ WRITE SYS$OUTPUT ""
More information about the openssl-commits
mailing list