[openssl-dev] Openssl-SNAP-20160314 Re: Openssl SNAP 20160313 issue Re: OPenSSL SNAP 20160312 issue

The Doctor doctor at doctor.nl2k.ab.ca
Mon Mar 14 15:02:56 UTC 2016


On Sun, Mar 13, 2016 at 02:53:17PM +0100, Richard Levitte wrote:
> In message <20160313123211.GA24618 at doctor.nl2k.ab.ca> on Sun, 13 Mar 2016 06:32:11 -0600, The Doctor <doctor at doctor.nl2k.ab.ca> said:
> 
> doctor> On Sat, Mar 12, 2016 at 08:22:47PM +0000, Salz, Rich wrote:
> doctor> > 
> doctor> > > make: don't know how to make
> doctor> > > crypto/aes/aes_cfb.o:crypto/aes/aes_cfb.o:. Stop
> doctor> > > 
> doctor> > > This was working yesterday.
> doctor> > 
> doctor> > And it will probably work again by tomorrow :)
> doctor> > 
> doctor> > Please include your config/setup command when you report things.
> doctor> > 
> doctor> > Please don't be surprised if a daily snapshot is broken for a day, consider waiting a day or two to see if the problem is fixed.
> doctor> > 
> doctor> > This is not the first time we've asked for this.
> doctor> 
> doctor> Now add Openssl-SNAP-20160313 issues
> doctor> 
> doctor> /bin/sh  ../configopenssl11
> doctor> Configuring OpenSSL version 1.1.0-pre4-dev (0x0x10100004L)
> doctor>     no-crypto-mdebug-backtrace [option]   OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE (skip dir)
> doctor>     no-ec_nistp_64_gcc_128 [default]  OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir)
> doctor>     no-heartbeats   [default]  OPENSSL_NO_HEARTBEATS (skip dir)
> doctor>     no-md2          [default]  OPENSSL_NO_MD2 (skip dir)
> doctor>     no-sctp         [option]   OPENSSL_NO_SCTP (skip dir)
> doctor>     no-sse2         [option]
> doctor>     no-ssl3         [default]  OPENSSL_NO_SSL3 (skip dir)
> doctor>     no-ssl3-method  [default]  OPENSSL_NO_SSL3_METHOD (skip dir)
> doctor>     no-static-engine [default]  OPENSSL_NO_STATIC_ENGINE (skip dir)
> doctor>     no-weak-ssl-ciphers [default]  OPENSSL_NO_WEAK_SSL_CIPHERS (skip dir)
> doctor> Configuring for debug-bsdi-x86-elf
> doctor> IsMK1MF       =no
> doctor> CC            =gcc
> doctor> CFLAG         =-DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer -O2 -march=i486 -Wall -g
> doctor> SHARED_CFLAG  =-fPIC
> doctor> DEFINES       =DSO_DLFCN HAVE_DLFCN_H OPENSSL_THREADS OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_BN_ASM_PART_WORDS OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_GF2m SHA1_ASM SHA256_ASM SHA512_ASM MD5_ASM RMD160_ASM AES_ASM GHASH_ASM ECP_NISTZ256_ASM POLY1305_ASM
> doctor> LFLAG         =-ldl -lgmp -lm -lc -lz
> doctor> PLIB_LFLAG    =
> doctor> EX_LIBS       =
> doctor> APPS_OBJ      =
> doctor> CPUID_OBJ     =mem_clr.o
> doctor> UPLINK_OBJ    =
> doctor> BN_ASM        =bn-586.o co-586.o x86-mont.o x86-gf2m.o
> doctor> EC_ASM        =ecp_nistz256.o ecp_nistz256-x86.o
> doctor> DES_ENC       =des-586.o crypt586.o
> doctor> AES_ENC       =aes-586.o
> doctor> BF_ENC        =bf-586.o
> doctor> CAST_ENC      =c_enc.o
> doctor> RC4_ENC       =rc4-586.o
> doctor> RC5_ENC       =rc5-586.o
> doctor> MD5_OBJ_ASM   =md5-586.o
> doctor> SHA1_OBJ_ASM  =sha1-586.o sha256-586.o sha512-586.o
> doctor> RMD160_OBJ_ASM=rmd-586.o
> doctor> CMLL_ENC      =cmll-x86.o
> doctor> MODES_OBJ     =ghash-x86.o
> doctor> PADLOCK_OBJ   =e_padlock-x86.o
> doctor> CHACHA_ENC    =chacha-x86.o
> doctor> POLY1305_OBJ  =poly1305-x86.o
> doctor> BLAKE2_OBJ    =
> doctor> PROCESSOR     =386
> doctor> RANLIB        =/usr/bin/ranlib
> doctor> ARFLAGS       =
> doctor> PERL          =/usr/bin/perl5
> doctor> 
> doctor> THIRTY_TWO_BIT mode
> doctor> BN_LLONG mode
> doctor> 
> doctor> Configured for debug-bsdi-x86-elf.
> doctor> ( cd .; /usr/bin/perl5 util/ck_errf.pl -strict */*.c */*/*.c )
> doctor> crypto/ex_data.c:254:crypto_get_ex_new_index:get_and_lock
> doctor> FATAL: error discrepancy
> doctor> *** Error code 1
> 
> Thank you, that is indeed something still lingering.  Will be fixed.
> 
> doctor> Stop.
> doctor> ns2.nl2k.ab.ca//usr/source/openssl-SNAP-20160313$ less ../configopenssl11
> doctor>  ./Configure \
> doctor>   386  \
> doctor>   threads \
> doctor>  shared \
> doctor>  no-sse2 \
> doctor>  enable-srtp \
> doctor>  no-sctp \
> doctor>  no-crypto-mdebug-backtrace \
> doctor>  enable-capieng \
> doctor>  enable-crypto-mdebug \
> doctor>  enable-seed \
> doctor>   enable-ssl-trace \
> doctor>  enable-camellia \
> doctor>  enable-rfc3779  enable-mdc2  enable-md5 \
> doctor>  enable-rc5 \
> doctor>  enable-unit-test \
> doctor>  enable-dh \
> doctor>  enable-bf \
> doctor>  enable-cast \
> doctor>  enable-chacha \
> doctor>  enable-cmac \
> doctor>  enable-cms \
> doctor>  enable-ct \
> doctor>  enable-des \
> doctor>  enable-dsa \
> doctor>  enable-dso \
> doctor>  enable-ec \
> doctor>  enable-engine \
> doctor>  enable-err\
> doctor>  enable-hmac \
> doctor>  enable-poly1305 \
> doctor>  enable-rsa \
> doctor>  enable-sha  \
> doctor>  enable-srp \
> doctor>  enable-aes  \
> doctor>  enable-egd \
> doctor>  enable-zlib \
> doctor>  zlib-dynamic \
> doctor>  --prefix=/usr/contrib \
> doctor>  --openssldir=/usr/contrib  debug-bsdi-x86-elf ; make update; make depend    
> doctor> 
> doctor> and what is debug-bsdi-x86-elf?
> doctor> 
> doctor>     "debug-bsdi-x86-elf" => {
> doctor>         inherit_from     => [ asm("x86_elf_asm") ],
> doctor>         cc               => "gcc",
> doctor>         cflags           => "-DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer
> doctor> -O2 -march=i486 -Wall -g",
> doctor>         thread_cflag     => "-pthread -D_THREAD_SAFE -D_REENTRANT",
> doctor>         lflags           => "-ldl -lgmp -lm -lc -lz",
> doctor>         bn_ops           => "THIRTY_TWO_BIT_LONG RC4_CHUNK BN_LLONG ",
> doctor>         dso_scheme       => "dlfcn",
> doctor>         shared_target    => "bsd-gcc-shared",
> doctor>         shared_cflag     => "-fPIC",
> doctor>         shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
> doctor>     },
> doctor> 
> doctor>        
> doctor> I have to drop this each day in 
> doctor> 
> doctor> Configurations/10-main.conf
> 
> Why do you have to drop in that file?  I suggest you make your own,
> for example Configurations/20-doctor.conf.  That one will be picked up
> along with the rest.
> 
> Also, if I may suggest, the "debug-" prefix is antiquated and has been
> replaced with the '-d' option to 'config', which will use additional
> debug flags where appropriate.  Unfortunately, the "bsdi-elf-gcc"
> config has never had any debug variant to my knowledge, so I fully
> understand your need there.
> 
> The config you have put together has a lot of similarities with the
> "BSD-x86-elf" one, with just a few additions, so it could be made much
> simpler like this:
> 
>     "bsdi-x86-elf" => {
>         inherit_from  => [ "BSD-x86-elf" ],
> 	cflags        => add(picker(default => "-DPERL5 -DTERMIOS -march=i486",
>                                     debug   => "-O2")),
>         lflags        => add("-ldl -lgmp -lm -lc"),
>     },
> 
> Note the 'debug => ...' line...  which flags will be added to the
> cflags when you run './config' with the option '-d'.
> 
> All that I have removed is there in BSD-x86-elf, or default in the
> case of the bn_ops (except for THIRTY_TWO_BIT_LONG that simply doesn't
> exist and is silently ignored).  Note that '-lz' is added
> automatically when you enable zlib, which your script does.
> 
> You may have copy copy the function 'picker' from that start of
> 10-main.conf.
>

I will stick with what works.

Also this showed up on 

openssl-SNAP-20160314

//usr/source/openssl-SNAP-20160314$ make
make: don't know how to make crypto/aes/aes_cfb.o:crypto/aes/aes_cfb.o:. Stop 

I got a bit compiled until this happened.

Last working package was

openssl-SNAP-20160311 .
 
> -- 
> Richard Levitte         levitte at openssl.org
> OpenSSL Project         http://www.openssl.org/~levitte/
> -- 
> openssl-dev mailing list
> To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev

-- 
Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca
God,Queen and country!Never Satan President Republic!Beware AntiChrist rising! 
http://www.fullyfollow.me/rootnl2k  Look at Psalms 14 and 53 on Atheism
Manitoba and Saskatchewan! Save your provinces in April! Vote Liberal!!


More information about the openssl-dev mailing list