[openssl-dev] Openssl-SNAP-20160315 issue Re: Openssl-SNAP-20160314 Re: Openssl SNAP 20160313 issue Re: OPenSSL SNAP 20160312 issue
The Doctor
doctor at doctor.nl2k.ab.ca
Tue Mar 15 15:32:42 UTC 2016
On Mon, Mar 14, 2016 at 09:02:56AM -0600, The Doctor wrote:
> On Sun, Mar 13, 2016 at 02:53:17PM +0100, Richard Levitte wrote:
> > In message <20160313123211.GA24618 at doctor.nl2k.ab.ca> on Sun, 13 Mar 2016 06:32:11 -0600, The Doctor <doctor at doctor.nl2k.ab.ca> said:
> >
> > doctor> On Sat, Mar 12, 2016 at 08:22:47PM +0000, Salz, Rich wrote:
> > doctor> >
> > doctor> > > make: don't know how to make
> > doctor> > > crypto/aes/aes_cfb.o:crypto/aes/aes_cfb.o:. Stop
> > doctor> > >
> > doctor> > > This was working yesterday.
> > doctor> >
> > doctor> > And it will probably work again by tomorrow :)
> > doctor> >
> > doctor> > Please include your config/setup command when you report things.
> > doctor> >
> > doctor> > Please don't be surprised if a daily snapshot is broken for a day, consider waiting a day or two to see if the problem is fixed.
> > doctor> >
> > doctor> > This is not the first time we've asked for this.
> > doctor>
> > doctor> Now add Openssl-SNAP-20160313 issues
> > doctor>
> > doctor> /bin/sh ../configopenssl11
> > doctor> Configuring OpenSSL version 1.1.0-pre4-dev (0x0x10100004L)
> > doctor> no-crypto-mdebug-backtrace [option] OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE (skip dir)
> > doctor> no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir)
> > doctor> no-heartbeats [default] OPENSSL_NO_HEARTBEATS (skip dir)
> > doctor> no-md2 [default] OPENSSL_NO_MD2 (skip dir)
> > doctor> no-sctp [option] OPENSSL_NO_SCTP (skip dir)
> > doctor> no-sse2 [option]
> > doctor> no-ssl3 [default] OPENSSL_NO_SSL3 (skip dir)
> > doctor> no-ssl3-method [default] OPENSSL_NO_SSL3_METHOD (skip dir)
> > doctor> no-static-engine [default] OPENSSL_NO_STATIC_ENGINE (skip dir)
> > doctor> no-weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS (skip dir)
> > doctor> Configuring for debug-bsdi-x86-elf
> > doctor> IsMK1MF =no
> > doctor> CC =gcc
> > doctor> CFLAG =-DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer -O2 -march=i486 -Wall -g
> > doctor> SHARED_CFLAG =-fPIC
> > doctor> DEFINES =DSO_DLFCN HAVE_DLFCN_H OPENSSL_THREADS OPENSSL_NO_STATIC_ENGINE OPENSSL_PIC OPENSSL_BN_ASM_PART_WORDS OPENSSL_BN_ASM_MONT OPENSSL_BN_ASM_GF2m SHA1_ASM SHA256_ASM SHA512_ASM MD5_ASM RMD160_ASM AES_ASM GHASH_ASM ECP_NISTZ256_ASM POLY1305_ASM
> > doctor> LFLAG =-ldl -lgmp -lm -lc -lz
> > doctor> PLIB_LFLAG =
> > doctor> EX_LIBS =
> > doctor> APPS_OBJ =
> > doctor> CPUID_OBJ =mem_clr.o
> > doctor> UPLINK_OBJ =
> > doctor> BN_ASM =bn-586.o co-586.o x86-mont.o x86-gf2m.o
> > doctor> EC_ASM =ecp_nistz256.o ecp_nistz256-x86.o
> > doctor> DES_ENC =des-586.o crypt586.o
> > doctor> AES_ENC =aes-586.o
> > doctor> BF_ENC =bf-586.o
> > doctor> CAST_ENC =c_enc.o
> > doctor> RC4_ENC =rc4-586.o
> > doctor> RC5_ENC =rc5-586.o
> > doctor> MD5_OBJ_ASM =md5-586.o
> > doctor> SHA1_OBJ_ASM =sha1-586.o sha256-586.o sha512-586.o
> > doctor> RMD160_OBJ_ASM=rmd-586.o
> > doctor> CMLL_ENC =cmll-x86.o
> > doctor> MODES_OBJ =ghash-x86.o
> > doctor> PADLOCK_OBJ =e_padlock-x86.o
> > doctor> CHACHA_ENC =chacha-x86.o
> > doctor> POLY1305_OBJ =poly1305-x86.o
> > doctor> BLAKE2_OBJ =
> > doctor> PROCESSOR =386
> > doctor> RANLIB =/usr/bin/ranlib
> > doctor> ARFLAGS =
> > doctor> PERL =/usr/bin/perl5
> > doctor>
> > doctor> THIRTY_TWO_BIT mode
> > doctor> BN_LLONG mode
> > doctor>
> > doctor> Configured for debug-bsdi-x86-elf.
> > doctor> ( cd .; /usr/bin/perl5 util/ck_errf.pl -strict */*.c */*/*.c )
> > doctor> crypto/ex_data.c:254:crypto_get_ex_new_index:get_and_lock
> > doctor> FATAL: error discrepancy
> > doctor> *** Error code 1
> >
> > Thank you, that is indeed something still lingering. Will be fixed.
> >
> > doctor> Stop.
> > doctor> ns2.nl2k.ab.ca//usr/source/openssl-SNAP-20160313$ less ../configopenssl11
> > doctor> ./Configure \
> > doctor> 386 \
> > doctor> threads \
> > doctor> shared \
> > doctor> no-sse2 \
> > doctor> enable-srtp \
> > doctor> no-sctp \
> > doctor> no-crypto-mdebug-backtrace \
> > doctor> enable-capieng \
> > doctor> enable-crypto-mdebug \
> > doctor> enable-seed \
> > doctor> enable-ssl-trace \
> > doctor> enable-camellia \
> > doctor> enable-rfc3779 enable-mdc2 enable-md5 \
> > doctor> enable-rc5 \
> > doctor> enable-unit-test \
> > doctor> enable-dh \
> > doctor> enable-bf \
> > doctor> enable-cast \
> > doctor> enable-chacha \
> > doctor> enable-cmac \
> > doctor> enable-cms \
> > doctor> enable-ct \
> > doctor> enable-des \
> > doctor> enable-dsa \
> > doctor> enable-dso \
> > doctor> enable-ec \
> > doctor> enable-engine \
> > doctor> enable-err\
> > doctor> enable-hmac \
> > doctor> enable-poly1305 \
> > doctor> enable-rsa \
> > doctor> enable-sha \
> > doctor> enable-srp \
> > doctor> enable-aes \
> > doctor> enable-egd \
> > doctor> enable-zlib \
> > doctor> zlib-dynamic \
> > doctor> --prefix=/usr/contrib \
> > doctor> --openssldir=/usr/contrib debug-bsdi-x86-elf ; make update; make depend
> > doctor>
> > doctor> and what is debug-bsdi-x86-elf?
> > doctor>
> > doctor> "debug-bsdi-x86-elf" => {
> > doctor> inherit_from => [ asm("x86_elf_asm") ],
> > doctor> cc => "gcc",
> > doctor> cflags => "-DPERL5 -DL_ENDIAN -DTERMIOS -fomit-frame-pointer
> > doctor> -O2 -march=i486 -Wall -g",
> > doctor> thread_cflag => "-pthread -D_THREAD_SAFE -D_REENTRANT",
> > doctor> lflags => "-ldl -lgmp -lm -lc -lz",
> > doctor> bn_ops => "THIRTY_TWO_BIT_LONG RC4_CHUNK BN_LLONG ",
> > doctor> dso_scheme => "dlfcn",
> > doctor> shared_target => "bsd-gcc-shared",
> > doctor> shared_cflag => "-fPIC",
> > doctor> shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
> > doctor> },
> > doctor>
> > doctor>
> > doctor> I have to drop this each day in
> > doctor>
> > doctor> Configurations/10-main.conf
> >
> > Why do you have to drop in that file? I suggest you make your own,
> > for example Configurations/20-doctor.conf. That one will be picked up
> > along with the rest.
> >
> > Also, if I may suggest, the "debug-" prefix is antiquated and has been
> > replaced with the '-d' option to 'config', which will use additional
> > debug flags where appropriate. Unfortunately, the "bsdi-elf-gcc"
> > config has never had any debug variant to my knowledge, so I fully
> > understand your need there.
> >
> > The config you have put together has a lot of similarities with the
> > "BSD-x86-elf" one, with just a few additions, so it could be made much
> > simpler like this:
> >
> > "bsdi-x86-elf" => {
> > inherit_from => [ "BSD-x86-elf" ],
> > cflags => add(picker(default => "-DPERL5 -DTERMIOS -march=i486",
> > debug => "-O2")),
> > lflags => add("-ldl -lgmp -lm -lc"),
> > },
> >
> > Note the 'debug => ...' line... which flags will be added to the
> > cflags when you run './config' with the option '-d'.
> >
> > All that I have removed is there in BSD-x86-elf, or default in the
> > case of the bn_ops (except for THIRTY_TWO_BIT_LONG that simply doesn't
> > exist and is silently ignored). Note that '-lz' is added
> > automatically when you enable zlib, which your script does.
> >
> > You may have copy copy the function 'picker' from that start of
> > 10-main.conf.
> >
>
> I will stick with what works.
>
> Also this showed up on
>
> openssl-SNAP-20160314
>
> //usr/source/openssl-SNAP-20160314$ make
> make: don't know how to make crypto/aes/aes_cfb.o:crypto/aes/aes_cfb.o:. Stop
>
> I got a bit compiled until this happened.
>
> Last working package was
>
> openssl-SNAP-20160311 .
>
Still the same issue with openssl-SNAP-20160315 .
What is the problem with crypto/aes/aes_cfb.o
??
> > --
> > Richard Levitte levitte at openssl.org
> > OpenSSL Project http://www.openssl.org/~levitte/
> > --
> > openssl-dev mailing list
> > To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
>
> --
> Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca
> God,Queen and country!Never Satan President Republic!Beware AntiChrist rising!
> http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism
> Manitoba and Saskatchewan! Save your provinces in April! Vote Liberal!!
> --
> openssl-dev mailing list
> To unsubscribe: https://mta.openssl.org/mailman/listinfo/openssl-dev
--
Member - Liberal International This is doctor@@nl2k.ab.ca Ici doctor@@nl2k.ab.ca
God,Queen and country!Never Satan President Republic!Beware AntiChrist rising!
http://www.fullyfollow.me/rootnl2k Look at Psalms 14 and 53 on Atheism
Manitoba and Saskatchewan! Save your provinces in April! Vote Liberal!!
More information about the openssl-dev
mailing list