OpenSSL Security Advisory

Matt Caswell matt at openssl.org
Tue May 3 14:52:54 UTC 2022


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

OpenSSL Security Advisory [03 May 2022]
===========================================

The c_rehash script allows command injection (CVE-2022-1292)
============================================================

Severity: Moderate

The c_rehash script does not properly sanitise shell metacharacters to
prevent command injection.  This script is distributed by some operating
systems in a manner where it is automatically executed.  On such operating
systems, an attacker could execute arbitrary commands with the privileges
of the script.

Use of the c_rehash script is considered obsolete and should be replaced
by the OpenSSL rehash command line tool.

This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0.

OpenSSL 1.0.2 users should upgrade to 1.0.2ze (premium support customers only)
OpenSSL 1.1.1 users should upgrade to 1.1.1o
OpenSSL 3.0 users should upgrade to 3.0.3

This issue was reported to OpenSSL on the 2nd April 2022.  It was found by
Elison Niven of Sophos.  The fix was developed by Tomas Mraz from OpenSSL.

OCSP_basic_verify may incorrectly verify the response signing certificate (CVE-2022-1343)
=========================================================================================

Severity: Moderate

The function `OCSP_basic_verify` verifies the signer certificate on an OCSP
response. In the case where the (non-default) flag OCSP_NOCHECKS is used then
the response will be positive (meaning a successful verification) even in the
case where the response signing certificate fails to verify.

It is anticipated that most users of `OCSP_basic_verify` will not use the
OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return
a negative value (indicating a fatal error) in the case of a certificate
verification failure. The normal expected return value in this case would be 0.

This issue also impacts the command line OpenSSL "ocsp" application. When
verifying an ocsp response with the "-no_cert_checks" option the command line
application will report that the verification is successful even though it has
in fact failed. In this case the incorrect successful response will also be
accompanied by error messages showing the failure and contradicting the
apparently successful result.

This issue affects OpenSSL version 3.0.

OpenSSL 3.0 users should upgrade to 3.0.3

This issue was reported to OpenSSL on the 6th April 2022 by Raul Metsma. The fix
was developed by Matt Caswell from OpenSSL.

Incorrect MAC key used in the RC4-MD5 ciphersuite (CVE-2022-1434)
=================================================================

Severity: Low

The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the
AAD data as the MAC key. This makes the MAC key trivially predictable.

An attacker could exploit this issue by performing a man-in-the-middle attack to
modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that
the modified data would still pass the MAC integrity check.

Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint
will always be rejected by the recipient and the connection will fail at that
point. Many application protocols require data to be sent from the client to the
server first. Therefore, in such a case, only an OpenSSL 3.0 server would be
impacted when talking to a non-OpenSSL 3.0 client.

If both endpoints are OpenSSL 3.0 then the attacker could modify data being
sent in both directions. In this case both clients and servers could be
affected, regardless of the application protocol.

Note that in the absence of an attacker this bug means that an OpenSSL 3.0
endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the
handshake when using this ciphersuite.

The confidentiality of data is not impacted by this issue, i.e. an attacker
cannot decrypt data that has been encrypted using this ciphersuite - they can
only modify it.

In order for this attack to work both endpoints must legitimately negotiate the
RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0,
and is not available within the default provider or the default ciphersuite
list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In
order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must
have occurred:

1) OpenSSL must have been compiled with the (non-default) compile time option
   enable-weak-ssl-ciphers

2) OpenSSL must have had the legacy provider explicitly loaded (either through
   application code or via configuration)

3) The ciphersuite must have been explicitly added to the ciphersuite list

4) The libssl security level must have been set to 0 (default is 1)

5) A version of SSL/TLS below TLSv1.3 must have been negotiated

6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any
   others that both endpoints have in common

This issue affects OpenSSL version 3.0.

OpenSSL 3.0 users should upgrade to 3.0.3

This issue was reported to OpenSSL on the 14th April 2022 by Tom Colley
(Broadcom). The fix was developed by Matt Caswell from OpenSSL.

Resource leakage when decoding certificates and keys (CVE-2022-1473)
====================================================================

Severity: Low

The OPENSSL_LH_flush() function, which empties a hash table, contains
a bug that breaks reuse of the memory occuppied by the removed hash
table entries.

This function is used when decoding certificates or keys. If a long lived
process periodically decodes certificates or keys its memory usage will
expand without bounds and the process might be terminated by the operating
system causing a denial of service. Also traversing the empty hash table
entries will take increasingly more time.

Typically such long lived processes might be TLS clients or TLS servers
configured to accept client certificate authentication.

The function was added in the OpenSSL 3.0 version thus older releases
are not affected by the issue.

It was addressed in the 3.0.3 release on the 3rd May 2022. The fix can be
found in git commit 64c85430f.

OpenSSL 1.0.2 users are not affected.
OpenSSL 1.1.1 users are not affected.
OpenSSL 3.0 users should upgrade to 3.0.3.

This issue was reported to OpenSSL on the 21st April 2022 by Aliaksei Levin.
The fix was developed by Hugo Landau from OpenSSL.

Note
====

OpenSSL 1.0.2 is out of support and no longer receiving public updates. Extended
support is available for premium support customers:
https://www.openssl.org/support/contracts.html

OpenSSL 1.1.0 is out of support and no longer receiving updates of any kind.
The impact of these issues on OpenSSL 1.1.0 has not been analysed.

Users of these versions should upgrade to OpenSSL 3.0 or 1.1.1.

References
==========

URL for this Security Advisory:
https://www.openssl.org/news/secadv/20220503.txt

Note: the online version of the advisory may be updated with additional details
over time.

For details of OpenSSL severity classifications please see:
https://www.openssl.org/policies/secpolicy.html
-----BEGIN PGP SIGNATURE-----

iQEzBAEBCAAdFiEEhlersmDwVrHlGQg52cTSbQ5gRJEFAmJxQVkACgkQ2cTSbQ5g
RJHdIAgAtRiH/X2IPccQ5XuTz8zoQWOkb9sfl4c9vTsRMteWtlW05ppPK4fpfHvM
ZCUsSA8Fw7R+PNUR0x9PB6acRjCXtqcNinELwKnZjU7QcsKeePoE3LzgQZCh2ogX
Q5p//eC5KUAZM2F1+jztw3eFupC3Og5hEj32JSaCVKQVK5sByR8/XEw7E8zARQdF
5I8qsUIasFem6R6STFQwKYHyvyWH0MH4KJvlYATqz6kdiokpIzMMJC3N7Q3VCuaG
ag/jzIdgPDLQNFbdOCZX7l2Njrp6iehPKg+7Ynft/j0XzLwXkPDQMMwrZaby7dLP
GQ+r6e/ZAX1b62cUhfa0L6s394fPDw==
=d89i
-----END PGP SIGNATURE-----


More information about the openssl-users mailing list